-
Trail-Link Three Front 3-Link Bracket (Panhard / Axle) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or...$149.99 -
Hall Sensor (Replacement) The Hall Sensor mounts on the front cover and uses magnets strategically mounted in the balancer pulley to generate a signal for proper ignition timing. Contact our Tech Support Line for further information at...$149.92 -
Hi-Torque Starter (81-91 P/U & 84-91 4Runner) (No Core Charge) If your engine starts hard or fails to start, the problem can be in the starter. And to replace your malfunctioning starter, there is no need to search long, just opt for this premium...$148.79 -
Street Clutch Kit The Street Clutch Kit is a great factory replacement clutch assembly that won't sacrifice quality and dependability. Clutch kits come with the pressure plate, clutch disc, pilot bearing, throw out bearing, and a new alignment tool...$148.57 -
LCE Alternator Bracket Kit (GM 1 Wire) We are happy to introduce a new GM Style Alternator Bracket Kit. This bracket kit will allow you to bolt a GM style 1 wire alternator to your 20R, 22R or 22RE motor with no major modifications, and it works with...$148.49 -
Front Leaf Spring Hanger This hanger is used to as a front mount for our 47" front leaf springs. Hanger is included in IFS Eliminator and Classic Lift kits. NOTE: Kit does not include bolts and bushings . This product should not be used in a...$147.07 -
Front 3-Link Lower Link Frame Bracket (You Choose Side) Individual Trail-Link Three™ Front 3-Link parts. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may...$146.65 -
Creeper Joint Shackle Mounts (You Choose Size) Creeper Joints are also available in a shackle mount for use with leaf springs. Using a Creeper Joint on the shackle end of a leaf spring reduces spring binding and increases suspension flex. Creeper Joint...$146.65 -
Underdrive Pulley (4" Triple Groove) Underdrive pulleys are an excellent addition for just about any high RPM performance application. The lightweight of these billet aluminum pulleys will reduce the drag on your engine, while the underdrive design...$145.92 -
Chromoly Pitman Arm Available in a 3/4" less than stock drop and flat versions. Tapered for either a Toyota FJ-80 TRE. or Chevy 1 Ton ends.Pitman arms fit either Toyota Hilux IFS steering box or FJ-60 Land cruiser box.We offer the GM tie rod ( 2010 R-L )...$145.00 - $212.00 -
Power Steering Fluid Cooler If you're running a high volume/pressure pump your system is generating much more heat then the stock system. Fluid overheating can cause damage to steering pump and steering box. Installing an oil cooler in front of the...$144.54 -
Aluminum Oil Catch Can Dual Baffle - Black What are the benefits of running a catch can? An oil catch can installs between your crankcase vent and intake system, replacing the traditional factory vent lines and catching oil that would otherwise enter...$144.50
-
fast shipping
Speed Delivery