-
Heavy Duty Shift Spring (Transfer Case) The stock transfer case shift springs tend to give a sloppy feel to the shifters and can lead to the transfer case shift lever popping out of gear on the trail. We recommend heavy duty shift springs be used with...$8.99 -
Drive Shaft Bolt Flange Nut Replacement drive shaft bolts, nuts and washers. Bolts include factory thread lock adhesive already applied to threads. NOTE: Sold individually. See Part #: 2053168 for drive shaft bolt and Part #: 2053170 for the...$7.43 -
Pilot Bearing The crankshaft pilot bearing does not require routine maintenance, but should be replaced when clutch replacement becomes necessary. In some cases, pilot bearings can wear excessively when mounting bolts loosen. Contact our Tech...$6.46 -
Hub Outer Dial O-Ring (Aisin Manual Hubs) There is a small rubber O-ring located between the inner and outer hub dials. If this ring becomes damaged water and dust can leak into the hubs. It can also make turning the dial difficult. Easy to install...$5.55 -
Drive Shaft Bolt Replacement drive shaft bolts, nuts and washers. Bolts include factory thread lock adhesive already applied to threads. NOTE: Sold individually. See Part #: 2053170 for drive shaft bolt lock washer and Part #: 2053172 for the drive...$5.47 -
Acorn Style Lug Nut Replacement Acorn Style lug nut (M12 X 1.50 thread pitch). NOTE: Sold individually. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at...$5.47 -
8" Pinion & Transfer Case Flange Nut The flange nuts are recommended to be staked or peened over to lock so they are not considered reusable. This stock replacement nut is used on the 8" pinion in the rear 1979-2002 and most transfer case flanges...$5.47 -
Clutch Alignment Tool Used to align splines of disc to pilot bearing for a clutch install. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent...$5.36 -
Rear Axle Wheel Stud These wheel studs are for rear axle application and has M12 X 1.50 threads. NOTE: Solid axle only. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further...$5.31 -
Shift Detent Bolt (Heavy Duty Transfer Case) The stock transfer case shift springs tend to give a sloppy feel to the shifters and can lead to the transfer case shift lever popping out of gear on the trail. We recommend heavy duty shift springs be used...$5.22 -
Front Hub Star Gasket These gaskets come in extremely handy when rebuilding your front hubs. These star-shaped gaskets are used for the front cover of the 4wd hub assembly. OEM Toyota Part #: 43531-60010 Contact our Tech Support Line for...$3.52 -
Open Style Lug Nut Replacement open-end lug nut (M12 X 1.50 thread pitch). NOTE: Sold individually. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at...$3.13
-
fast shipping
Speed Delivery