-
Front Strut Rod Bushings With the increased use of higher traction and performance tires on today's vehicles, soft original factory rubber bushings can very often cause the steering axis slant (caster alignment) to excessively and adversely change...$29.94 -
Header Stud Set The factory exhaust manifold studs have a shoulder in the center that can interfere with proper header tightening. Our 10mm x 1.25 x 48mm long, heat-treated plated header mounting studs are stronger than stock. Kit Includes: (12)...$29.94 -
Radiator Outlet Hose LC Engineering is now offering an OEM radiator outlet hose. OEM Toyota Part #: 16572-35060 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...$29.81 -
Coolant Temp Sensor This coolant temperature sensor is a replacement for our LC Pro Fuel Injection Kits. This sensor has 3/8" NPT threads with a GM style weather pack connector. Contact our Tech Support Line for further information at...$29.75 -
Trail Safe Inner Axle Seals Figure (A): Deflection gaps in the Brand X seal are the result of the spring clip opening. Fluid is allowed to bypass the seal lip through these deflection gaps. The result is a leak. Figure (B): The Trail Safe seal lip is...$29.60 -
OEM PCV Hose This is the OEM 22R PCV hose for the PCV Valve on top of the valve cover. OEM Toyota Part #: 12261-38011 This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further...$29.50 -
LC Engineering Classic Flexfit Hat (Modern Flag) Show your support at the races or while you're out rock crawling with an LC Engineering hat! Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...$29.23 -
Valve Cover Billet Half Moons We are excited to announce the release of a brand new product that has been highly requested by our customers-Billet Half Moons for the valve cover! After months of development and feedback, we've...$29.22 -
Exhaust Gasket Almost the same as the OEM 1985 to 1995 22R or RE. The turbo exhaust manifolds use a different stud pattern. NOTE: This will only work w/ the stock style bottom mount turbo manifolds. If you have our top mount turbo manifold, you will...$28.64 -
OEM Thermostat (190 F / 88 C) If you are a Toyota owner, then you know the benefit of using OEM parts direct from the dealership. We strive to carry quality parts for our customers, and it is no exception with this quality OEM Thermostat direct from...$28.31 -
Weld On Flat Tab Standard (You Choose Size) TG Weld On Coped Tabs are made from steel, 3/16" thick with a 1/2" diameter hole, and are available in standard or offset. Tabs are coped for either 1 1/2" tubing or 1 3/4" tubing. NOTE: Shipped raw and...$28.23 -
Steering Knuckle Pull Scale A pull scale is helpful in setting up the shims on a knuckle. By increasing the shims above and below the knuckle the knuckle becomes tighter. When installing new knuckle bearings we recommend checking the shims with a pull...$28.14
-
fast shipping
Speed Delivery