-
26" Extended Brake Line (Front / Female - Female) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size:...$59.21 -
26" Extended Brake Line (Rear / Female - Male) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size...$59.21 -
Line Lock (Mechanical) This mechanical line lock will allow you to use your normal brake hydraulics to hold your brakes locked. You plumb your rear brake line through this line lock and then you simply press the line lock button down while pushing your...$48.30 -
Toyota Backing Plate Eliminator (w/ Brake Line Holder) Toyota solid axle backing plates (sometimes called dust shields) seem to become damaged with even the slightest touch, but removing them leaves your brake hard lines unsecured. On the other hand,...$46.82 -
Front Brake Pads Need and inexpensive way to stop your Toyota truck. Try these Premium Semi-Metallic asbestos-free front replacement brake pads. This pad is for use with the late-model IFS 4WD calipers. If you are adding the vented rotors and upgraded...$39.93 -
Rear Disc Brake Pads Semi-metallic replacement brake pads for your Pickup or 4Runner rear disc brake kits. NOTE: These brake pads are only used as a replacement for our kit, see Part #: 1055202. Contact our Tech Support Line for further...$39.18 -
Dust Shield Eliminator Kit The brake backing plates can be a bother on front Toyota solid axles. They often get bent from trail damage and small rocks can get trapped between the backing plate and the rotor causing noise and damage. For many years we...$37.52 -
Residual Valve (2 PSI) When converting your rear drum brakes to disc you will need to hold pressure on the rear line to keep the pads in contact with the rotors. If you don't then you will have to pump your pedal to get a firm brake feel. This residual...$32.39 -
Custom Brake Line (Upgrading to 1" Bore Master Cylinder) Because we know how much everybody hates making custom brake lines, this line comes ready to plug and play. It will bolt right onto your new 1" Bore Master Cylinder with no major modifications...$30.99 -
Brake Hard Line Kit (Left & Right) This caliper hard line kit is for straight axle Trucks and 4Runners only. This kit includes the caliper brake lines for both the right and left sides. NOTE: Not for IFS vehicles. Contact our Tech Support...$23.51 -
Swagelok (1/8" NP Male To 3/16" Tubing) These neat little devices make it much easier to plumb in brake accessories, like proportioning valves, line locks etc... One end has 1/8"npt threads to go into most brake accessory ports. The opposite end has a...$16.09 -
Caliper Bleeder Screw The caliper bleeder screws are often stripped out and difficult to open. Replace your damaged, clogged, or stripped out caliper bleeder screw with one of these. This is just one of the many parts we carry for brake hardware...$13.81
-
fast shipping
Speed Delivery