3″ Billet Spacer
(Flex Fan)
This Flex Fan Spacer Kit has all the additional parts you need to install a 2RZ/3RZ/3VZ Flex Fan. This spacer is made from billet aluminum.
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
- 1995.5-2004 2RZ 2.4L Engines
- 1995.5-2004 3RZ 2.7L Engines
- 1988-1995 3VZ 3.0L Engines
To open a printable PDF version of this instruction
CLICK HERE
Kit Includes:
- (1) Billet Fan Spacer
- (8) M8 Flat Washers
- (4) M8-1.25 x 16mm Hex Bolts
- (4) M8-1.25 x 30mm Hex Bolts
Installation Instructions:
-
1. Loosen bolts that hold the fan to the water pump. Do not remove them just loosen them while the belt is still on to make removal easier.
2. Remove water pump belt and then remove fan assembly from water pump. You can also remove the fan shroud for extra room but this is not necessary.
3. Remove stock fan studs in the water pump and chase hub threads with a tap.
4. Install the flex fan on the fan spacer using the shorter M8 Hex Bolts and M8 flat washers. Use a mild thread locking compound on bolts.
5. Install hub and fan assembly on the water pump flange using the longer M8 hex bolts and M8 flat washers.
6. Rotate engine by hand, checking for fan clearance before starting engine.