• Inner Brass Bushing (Front Axle Replacement) This replacement brass axle bushing is recommended any time you're replacing your axles. Bushing centers front axle in housing. NOTE: (2) are required per axle, one on each side. This is only for front...
    $29.99
  • Steering Knuckle Pull Scale A pull scale is helpful in setting up the shims on a knuckle. By increasing the shims above and below the knuckle the knuckle becomes tighter. When installing new knuckle bearings we recommend checking the shims with a pull...
    $29.99
  • Weld On Flat Tab (3" Cope) Our 3" coped weld on flat tab is made from 1020 hot rolled steel, 1/4" thick, and is designed for a 9/16" bolt. The width is 2" and the overall height is 2-15/16". The center of the hole is is 1-5/8" from the top of the cope,...
    $29.99
  • Weld On Flat Tab (9/16" Hole) Our weld on flat tabs are made from 1020 hot rolled steel, are 1/4" thick and are designed for a 9/16" bolt, they are 2" wide and 2 5/8" tall. The center of the hole is 1 5/8" from the bottom of the tab. These tabs are...
    $29.99
  • Glowshift Single Gauge A-Pillar Pod GlowShift's Universal Single A-pillar Pod is a single gauge pod that is designed to be installed on virtually any vehicle and will house (1) 2 1/16" (52mm) gauge. Each universal single gauge pod is crafted from...
    $29.99
  • Radiator Outlet Hose LC Engineering is now offering an OEM radiator outlet hose. OEM Toyota Part #: 16572-35060 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...
    $29.81
  • LC Engineering Large Decal (26" X 8") Decals increase horsepower! Not really, but you can show the person behind you why you're in front! New limited edition old school Toyota decals. Contact our Tech Support Line for further information at...
    $29.11
  • OEM Thermostat (190 F / 88 C) If you are a Toyota owner, then you know the benefit of using OEM parts direct from the dealership. We strive to carry quality parts for our customers, and it is no exception with this quality OEM Thermostat direct from...
    $28.31
  • Weld On Flat Tab Standard (You Choose Size) TG Weld On Coped Tabs are made from steel, 3/16" thick with a 1/2" diameter hole, and are available in standard or offset. Tabs are coped for either 1 1/2" tubing or 1 3/4" tubing. NOTE: Shipped raw and...
    $28.23
    choose option