Oxygen Sensor Install Kit
(2-Bolt Style)
This kit contains everything you need to install the factory 2-bolt O2 sensor into your custom exhaust. It allows you to weld in the O2 sensor wherever you want it in the exhaust.
Kit Includes:
(2) Studs and...
2-Bolt Flange
(2 1/4")
Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8" thick, for 2-1/4" exhaust tubing.
Contact our Tech Support Line for further...
OEM Water Pump Gasket
Gaskets seal and mate surfaces between various components to keep oil, coolant, air, and fuel in their respective places. Over time gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs...
Rear Outer Axle Seal
(Rubber)
Replacing your rear axle seals will cure annoying gear oil leaks from your rear housing, and keeps oil off your rear brakes. You should replace the rear seal any time you remove the axle.
Contact our Tech Support...
Seal Saver
(Rear of Crankshaft)
Do you have a pesky oil leak coming from the rear main seal? Don't just keep swapping out rear main seals. LC Engineering carries this seal saver that slides right over the rear hub of the crank and rides between the...
Front Frame Shackle Bushings
For high-performance applications, the combination of heavy duty or performance leaf springs and HYPER-FLEX performance polyurethane spring bushings deliver the maximum benefit.
This product should not be used in a manner...
Temperature Gauge Sender
This temperature sender is a stock replacement for 22RE engines. After years of use, electric components can go bad and give false readings to the ECU, that is why we recommend replacing them with new ones, for accurate...
Hose Clamp for Radiator
(Outlet #1 & #2)
LC Engineering is now offering an OEM hose clamp for your radiator (specifically outlet #1 ). Don't see what you need? Call our sales team, they might be able to track it down for you.
OEM Toyota Part...
Caliper Bleeder Screw
The caliper bleeder screws are often stripped out and difficult to open. Replace your damaged, clogged, or stripped out caliper bleeder screw with one of these. This is just one of the many parts we carry for brake hardware...
2-Bolt Flange
(You Choose Size)
2 1/4" Flanges:
Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8" thick, for 2-1/4" exhaust tubing.
2 1/2"...
2 1/4" Radiator Cap
(Large)
This Sankei OEM style Japan Radiator Pressure Cap that directly replaces the factory caps. The cap is 100% Stainless Steel and is a 13 pound cap or 0.9 kg/cm. Toyota used two styles of radiator caps the large one that...
OEM EGR Crossover Gasket
OEM Gasket for that EGR Crossover plate located on the back side of the cylinder head.
OEM Toyota Part #: 11182-35050
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images...