PLX DM-6 + SM-AFR Wideband AFR Combo Gen 4 (w/ Gauge) We're proud to introduce the next generation wideband oxygen sensor controller with intelligent health monitoring technology and current for improved sensor performance. The new Gen4 Wideband AFR...

Gauge Pillar (Triple) Most older Toyota trucks had some pretty basic gauges (speedo, tach and fuel gauge). This doesn't work too well if you want to keep a close eye on the "heartbeat" of your engine. Most drivers want to see water temps, oil...

LC Short Shifter Kit You MUST measure your transmission for fitment. NO RETURNS ACCEPTED ON ANY SHORT SHIFTER KIT Fitments listed are suggestive. We cannot quote direct fitment to any vehicle, as Toyota changed too much, too often.We have seen factory...

PLX DM-6 Multi Gauge Display The DM-6 Multi Gauge Display Module is an OLED automotive gauge designed to display the measured values from your PLX Sensor Modules. Measuring only 0.7" (18 mm) thin, it can be mounted virtually anywhere. The DM-6 Multi...

Gauge Pillar (Double) Most older Toyota trucks had some pretty basic gauges (speedo, tach and fuel gauge). This doesn't work too well if you want to keep a close eye on the "heartbeat" of your engine. Most drivers want to see water temps, oil pressure,...

Fuel Pressure Gauge Kit (For In-Cab Use) GlowShift’s Tinted Series 100 PSI Fuel Pressure Gauge is the perfect accessory for anyone looking to keep a close eye on their fuel system’s pressure to ensure it’s performing at optimal...

Fuel Pressure Gauge Kit (For In-Cab Use) GlowShift’s Tinted Series 30 PSI Fuel Pressure Gauge is the perfect accessory for anyone looking to keep a close eye on their truck’s fuel system pressure to ensure it’s performing at...

OEM Heater Control Indicator Lens Did your heater control indicator lens break? No problem... OEM factory Toyota unit here! Look into our LCE short shift kits and prevent this from happening again lol. OEM Toyota P/N: 55519-89143 Contact our...

Steering Wheel Disconnect (Weld On) Weld-On Steering Wheel Disconnect   Trail-Gear's weld-on steering wheel disconnect uses a solid billet steel hex shaft that you weld over your existing steering shaft or steering column. The billet aluminum...

Oxygen Sensors Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum and ceramics; Features double protection layer, aluminum oxide trap layer, porous PTFE filter and...

PLX 4.9 Upgrade Wideband Cable The O2 sensor harness connects the PLX Wideband Controller with a Bosch LSU 4.9 sensor. It includes a 6 position molex mini fit jr male plug on one end and a standard 6 position Bosch LSU 4.9 connector on the other end...

PLX Gauge Ring Mount The 2 1/16" (52mm) gauge ring mount offers the perfect mounting solution for those that do not wish to drill into their dashboard or install a gauge cluster. This 2 1/16" gauge ring mount will fit any standard sized 2 1/16" gauge...