-
Valve Cover Hardware Kit Valve cover hardware kit includes (4) studs and (4) chrome acorn nuts, for the 20R/22R/RE (all years). We also use the studs in this kit for mounting 1" spacers to adapters, nuts are not used. This product should not be used...$21.37 -
Distributor Plug This plug is designed to plug the hole in the cylinder head after removing the distributor. This is part of the Pro Fuel Injection setup we offer. Contact our Tech Support Line for further information at 928-575-2174...$21.37 -
Thermostat (195 Degree) Reduced engine temperatures add life to your engine and provide a denser air/fuel mixture which helps produce more horsepower. Consistent control of engine temperature allows an engine to operate at its peak efficiency, no...$21.37 -
Seal Saver (Rear Main) Do you have a pesky oil leak coming from the rear main seal? Don't just keep swapping out rear main seals. LC Engineering carries this seal saver that slides right over the rear hub of the crank and rides between the crank and...$20.70 -
LC Engineering Classic Flexfit Hat (Racing Logo) Show your support at the races or while you're out rock crawling with an LC Engineering hat! Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...$20.60 -
Throttle Position Sensor Plug (Sidedraft) This plug is only to be used with sensor, see Part #: 1061090, and is for the individual fuel injection throttle body set up that we sell, see Part #: 1061100. NOTE: This throttle position sensor plug will...$20.55 -
Serial Cable Serial Cable to connect your computer to split second box or, SDS computer to SDS controller. Length: 10ft / 3m Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...$20.55 -
Tow Hook (Hitch Receiver Mounted) This Hitch Receiver Mounted Tow Hook provides a quick and easy rigging point to attach snatch and tow straps for easy vehicle towing and recovery. Features: Black Powder Coat Finish Fits any 2″ standard...$20.54 -
Air Injection Block Plate Kit This plate kit will block off the holes on top of the exhaust manifold or header. Kit Includes: (2) Stainless Steel plates (2) Gaskets NOTE: Not for use on smog checked vehicles, fits LC Headers or header flanges...$20.50 -
Header Stud Set The factory exhaust manifold studs have a shoulder in the center that can interfere with proper header tightening. Our 10mm x 1.25 x 48mm long, heat-treated plated header mounting studs are stronger than stock. Works with a stock...$20.30 -
Fuel Injector Rebuild Kit Located on the fuel rail end of the injectors. LC Engineering suggests changing these when rebuilding or servicing the engine or the manifold assembly. LC Engineering flow-matched fuel injectors include all new parts in the...$20.30 -
Breather Hose (Front Of Valve Cover) OEM Toyota hose comes off the valve cover and goes to intake manifold. OEM Toyota Part #: 12262-35060 NOTE: Not for carbureted applications, for carbureted models, see Part #: 1072413 (1984), or Part #: ...$20.24
-
fast shipping
Speed Delivery