Water Block Plate (Center Of Head) If you are installing an Offenhauser intake (or if you are eliminating the heater core), there won't be room for the heater core outlet off the cylinder head. This water block plate goes in the center of the cylinder...

Fuel Pump Block Plate Kit This block off plate blocks the hole on the front of the cylinder head where a manual fuel pump would mount. Perfect for if you are using an electric fuel pump on an engine that originally had a manual pump installed. ...

Water Block Plate (Timing Cover Passenger Side) This block plate goes on the passenger side of the timing cover. Perfect for eliminating the unnecessary water hoses going around your engine compartment. Contact our Tech Support Line for...

Water Block Plate (Timing Cover Driver Side) This block plate goes on the driver's side back of the timing cover which is for deleting the factory heater return line on most 22's. Contact our Tech Support Line for further information at...

Pro Water Block Plate Kit This water block plate kit is perfect when trying to eliminate some of the un-necessary water lines on some applications. This kit will come with a block plate for the center of the head (Offenhauser manifolds will need this),...

Water Block Plate Kit (8 Bolt / Under Intake) This water plate will fit on any 22R carbureted manifold with the 8-bolt design underneath it. This plate works with stock manifolds or aftermarket designs. You will need to verify the bolt count on the...

Water Block Plate Kit (11 Bolt / Under Intake) This water plate will fit on any 22R carbureted manifold with the 11-bolt design underneath it. This plate works with stock manifolds or aftermarket designs. You will need to verify the bolt count on the...

Air Injection Block Plate (Stainless Steel) This Stainless Steel block plate is for eliminating the air injection tubes above the exhaust header. For show, off-road or race applications that don't require emissions equipment, this allows you to remove...

Air Injection Block Plate Kit This plate kit will block off the holes on top of the exhaust manifold or header. Kit Includes: (2) Stainless Steel plates (2) Gaskets NOTE: Not for use on smog checked vehicles, fits LC Headers or header flanges...

Water Block Plate (Under EFI Manifold) This water block off plate goes under the intake manifold on fuel-injected 22RE engines. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...

Air Injection Tube Block-off Plate Kit (Trail Gear) Trail-Gear has come up with this very clean way to totally eliminate your stock air injection tube. This kit contains 2 plates that will allow you to install our headers without the air injection tube...

22RE Cold Start Injector Block Plate Kit (22RE EFI Intake Manifold) This kit is designed to allow you to safely block of the cold start injector and supply when you are upgrading your efi system to a stand alone fuel management. NOTE: For a complete...