-
Crank Trigger Magnet Individual replacement crank position sensor magnets for our Pro Fuel Injection kits. These magnets get installed in the balancer pulley and trigger the hall effect sensor to generate a signal for the ignition system. NOTE: Sold...$8.19 -
Teflon Heat Isolation Gasket (Throttle Body) Teflon Heat Isolator Kits keep the power-robbing heat away from the intake air. This is the ultimate for improving mileage and performance for the price. Installs between the throttle body and intake...$8.19 -
Teflon Heat Isolation Gasket (Throttle Body) Teflon Heat Isolator Kits keep the power-robbing heat away from the intake air. This is the ultimate for improving mileage and performance for the price. Installs between the throttle body and intake...$8.19 -
Plastigage Clearance Indicator (.001-.003 / .025mm-.076mm) Made from a special extruded plastic thread with accurately controlled crush properties, Plastigage provides a fast and accurate way to check bearing clearances. Plastigage is packaged in a...$7.55 -
Throttle Body Gasket (Metal "D" Shape) Throttle body gaskets can be a source of hard-to-find vacuum leaks if the throttle body is removed or disrupted. Any time you remove your throttle body, you should replace the gasket while you're at it. This is...$7.45 -
Air Temp Plate (Adapts Cold Start Injector to Air Temp Sensor) Custom made plate to install an air temperature sensor where the cold start injector normally sits. Contact our Tech Support Line for further information at 928-575-2174...$7.45 -
Johnny Joint Jam Nut (Right Threaded) These jam nuts are good to have if you spend a lot of time working on your rock crawler suspension. These jam nuts tighten against the rod ends to keep them from loosening. 1 1/4"-12 right hand thread jam nut for...$7.17 -
OEM Hood Prop Clip (Pickup / 4Runner / T100 / Tacoma) OEM Toyota hood prop clip. OEM Toyota Part #: 53452-90351 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...$7.16 -
22R/RE Valve Cover Keychain Introducing our latest addition to the LC Engineering lineup: the all-new die-cast metal keychain! Crafted with precision and designed for durability, these lightweight keychains are built to withstand the rigors of daily...$7.16 -
Fuel Union / Banjo Bolts This fitting will be used on both sides of the 22re fuel filter. OEM Toyota Part #: 90401-12097 NOTE: The threads of these fittings are metric M12 x 1.25. Contact our Tech Support Line for further information at...$7.00 -
Pilot Bearing The crankshaft pilot bearing does not require routine maintenance, but should be replaced when clutch replacement becomes necessary. In some cases, pilot bearings can wear excessively when mounting bolts loosen. Contact our Tech...$6.46 -
Tie Rod Boots (Pair) At last it is possible to replace a damaged tie rod dust boot without having the expense of buying an entire new tie rod! These boots resist damage from rocks, sand, water, road salt, and oils better than many other O.E.M. rubber...$6.38
-
fast shipping
Speed Delivery