Oxygen Sensor (Heated 4 Wire) This is considered a universal replacement for the 4-wire heated O2 sensor as well as a stock replacement. This would be an upgrade to the one wire but will require running power and ground to the sensor. Constructed from...

PLX SM Wideband Air Fuel Ratio Sensor Module (No Gauge) We're proud to introduce the next generation wideband oxygen sensor controller with intelligent health monitoring technology and current for improved sensor performance. The new Gen4 Wideband AFR...

PLX SM Exhaust Gas Temperature Sensor The EGT sensor kit is the ideal sensor to be used with the PLX SM-EGT sensor module. It is a standard K Type thermo coupler designed specifically for exhaust gas temperature measurements for high performance...

PLX Air Intake Temperature Sensor The AIT sensor kit is the ideal sensor to be used with the PLX SM-AIT sensor module. It is a standard K Type thermo coupler designed specifically for air intake measurements for naturally aspirated, turbo, supercharged...

PLX Bosch LSU 4.9 Wideband Oxygen Sensor The Bosch LSU 4.9 wideband oxygen sensor is a 5 wire sensor with a built-in calibration resistor with an M18 x 1.5 thread. This is the industry standard sensor for tuning internal combustion engines of various...

Throttle Position Sensor (Sidedraft) Throttle position sensor for converting to sidedraft throttle body injection. If you would like to connect it to the wiring harness, see Part #: 1061095. NOTE: This throttle position sensor will not mount or...

Single Wire O2 Sensor Relocation kit If your O2 location has moved due to an aftermarket header, this single wire kit will extend the lead on your current connection. Contact our Tech Support Line for further information at 928-575-2174...