Economy Master Rebuild Kit
Time to rebuild that tired factory turbo engine, but you're on a tight budget? No worries, LC Engineering has you covered! These Economy Master Rebuild Kits offer the high-quality parts you expect from LC but with a lower cost to help your budget stay on track, and no, lower price does not mean made with inferior parts. This kit will take care of your factory turbo engine rebuild, or an economical approach to building a low compression turbo engine under 10psi. If you were looking for a bit more boost, we recommend our Premium Master Rebuild Kit for the 22RTE and upgrading to Forged Pistons, or check out one of our Pro Short Block Kits. These kits will handle those above 10 psi goals with a tremendous strength increase.
Street Hyper Pistons
Hypereutectic pistons are a much stronger piston that will not absorb as much heat as a cast style piston. That means you can make more power with less wear on your engine!! Pistons come with new wrist pins, locks and are available in standard, +.020", +.030", +.040" or +.060" bore sizes. These pistons are made by Safety Auto and manufactured in Taiwan.
Hastings Piston Rings
Hastings piston rings are built with ductile iron, plasma moly top compression rings. They have conventional cast iron second rings and 3-piece, standard-tension stainless steel oil rings. These ring sets are ideal for street use, race applications, and mild levels of nitrous or forced induction. NOTE: These are not a gapless ring set. Hastings pistons rings are manufactured in the United States.
Main, Rod & Thrust Bearings
Main bearings are available in standard, +.010, +.020" or +.030". Rod bearings are available in standard, +.010, +.020" +.030", or +.040". Thrust bearing all come in standard size. These are a Safety Auto brand and manufactured in Japan.
Complete Gasket Kit
These high-quality gasket kits include A composite head gasket and all the other gaskets you need to re-assemble your engine. These are a Safety Auto brand and manufactured in Taiwan.
Timing Chain Kit
Single row timing chain kits include chain, plastic guides, tensioner, and sprockets. The timing chain tensioner in this kit is made in Japan whereas the chain and sprockets are made in Taiwan.
This kit comes with an OE oil pump. This is the same pump you will get at your parts house at a fraction of the cost of an OEM.
Brass Freeze Plugs
Brass replacement freeze plugs will last longer than steel or aluminum and give you that extra protection for your engine. These freeze plugs are made in the U.S.A.
This product should not be used in a manner that violates Federal EPA Laws.
NOTE: We do exchange unopened parts; All boxes are marked on the outside. You should verify the sizes needed before opening the boxes. Before doing any boring on the block, your machine shop should have the pistons in hand. We do not accept returns of any Standard sized pistons.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.