Installing longer rear springs requires moving the rear spring hangers forward on the frame. The factory hangers are too thin to cut off and reuse. These hangers weld under the frame, forward of the stock units. Holes on top of hangers allow rosette welds. Made from 1/4" plate steel,which is much stronger than stock hangers.
NOTE: Made from 1/4 plate steel, with 18mm bolt holes, and an unpainted finish. Sold as a pair (2).
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!