3VZ Street Header Kit
Hands down the best 3.0L performance headers on the market! These headers are constructed using all stainless steel tubing, 16 gauge .065 wall, and 1/2" thick flanges. The collectors are 409 Stainless Steel made in house with 2 1/4" opening, for the strongest most durable headers you can buy. These headers are for 4WD applications only and are a direct fit application, which means that you don't have to buy any other parts or do any modifications to make them fit your vehicle! Like all of LC Engineering's headers, these are ceramic coated to reduce heat and improve appearance.
The 3VZ header kit now block off the EGR system as well as air injection. The kit will include the parts to block off both as well as a resistor selection to prevent check engine light. Some resistor changes may be necessary. The headers will end near the bell housing and exhaust will need to be made from there on.
- Gaskets and hardware
- EGR block off kit
Optional: Header stud kit, see Part #: 1045031.
This product should not be used in a manner that violates Federal EPA Laws.
NOTE: Not C.A.R.B. approved. For off-road use only in California. It does not have EGR provisions or Air Injection. Will not fit 2WD Trucks. There are some potential fitment issues to be aware of. From the factory, Toyota used two different lengths clutch forks. If you have the longer version it will need to be trimmed for proper clearance. There are brake and fuel lines on the passenger side that may need to be carefully adjusted to allow for more clearance away from the exhaust system. LC Engineering does NOT recommend wrapping our headers with any sort of exhaust wrap. Doing so will increase the likelihood of a premature failure of the header, as it holds contaminants to the exhaust tubing and increases the chances of corrosion. Exhaust wraps will void any and all warranty claims.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.