Rear Axle Wheel Stud These wheel studs are for rear axle application and has M12 X 1.50 threads. NOTE: Solid axle only. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further...

Open Style Lug Nut Replacement open-end lug nut (M12 X 1.50 thread pitch). NOTE: Sold individually. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at...

Acorn Style Lug Nut Replacement Acorn Style lug nut (M12 X 1.50 thread pitch). NOTE: Sold individually. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at...

Inspection Plug Installation Kit Extra large differential fill and inspection cap. Designed to allow quick access for inspecting the ring gear. Features1.5" diameter access hole. Threaded aluminum cap uses a rubber o-ring for a tight seal...

Rear Rock Assault Axle Housing Kit (IFS Width) The axle tubes are now made from 5/16" thick, high strength DOM tubing and engage 5/8" farther into the center section. On top of that, there is a 360° gusset welded around the tubes on the inside of...

1.5" Wheel Spacers These bolt-on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Great for use on solid axles conversions to make the front axle similar in width as the wider rear axle found on...

2.0" Wheel Spacers These bolt-on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Great for use on solid axles conversions to make the front axle similar in width as the wider rear axle found on...

Long Travel Driveline (Matsuba U Joint) We are pleased to announce the release of a new and improved heavy duty drive line. The heavy duty driveline splines are 42% larger than our old design and the spline section is nylon-coated to prolong many years...

Master Install Kit These parts are getting hard to find so get the whole kit to have a successful install. Kit Includes: Carrier Bearings (2), see Part #: 1091222 Pinion Bearing Retainer Shims, see Part #: 1091227 Rear Pinion Bearing, see Part #: ...

Pinion Head Bearing The 6.7" Toyota differential is becoming increasingly more difficult to find parts for. Fortunately, LC Engineering has come to the rescue with some replacement parts for these Celica rear ends. This is the bearing that rides on the...

Carrier Bearing (Pinion Side) Carrier bearing for the 6.7" Celica differential. The 6.7" Toyota differential is becoming increasingly more difficult to find parts for. Fortunately, LC Engineering has come to the rescue with some replacement parts for...

Shaft Tail Bearing (Rear Pinion) This bearing is for the end of the pinion gear, closest to the splines. The 6.7" Toyota differential is becoming increasingly more difficult to find parts for. Fortunately, LC Engineering has come to the rescue with...