AXLE

Inspection Plug Installation Kit Extra large differential fill and inspection cap. Designed to allow quick access for inspecting the ring gear. Features1.5" diameter access hole. Threaded aluminum cap uses a rubber o-ring for a tight seal...

Axle Breather Relocation Kit This Breather Relocation Kit was specifically designed to relocate your rear axle breather when welding up a rear axle gusset or any type of mount or bracket. This kit uses our Creeper Breather to keep any dirt, mud, or...

Toyota Backing Plate Eliminator (w/ Brake Line Holder) Toyota solid axle backing plates (sometimes called dust shields) seem to become damaged with even the slightest touch, but removing them leaves your brake hard lines unsecured. On the other hand,...

Spindle Stud Kit When assembling your spindles gaskets does it feel like your all thumbs? This kit contains (16) studs and flanged nuts. With studs installed it's easier to install the spindle gaskets. Gaskets are placed on the studs one at a time,...

Upper Gusset (Solid Front Axle) This gusset welds on top of your Toyota front solid axle and helps prevent bending of the axle housing. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for...

Differential Stud Eliminator Kit When you come home after a trail ride, do you see oil leaking from the center of your axle housings? The stock axle housing studs may be pulling loose. No longer do you have to tap and drill the studs out and replace...

Solid Pinion Spacer (High Pinion) Solid pinion spacers prevent loosening of the gear setup preload. Originally designed for older Toyota applications, Toyota stopped using them decades ago. Solid spacer and shims replace the crush sleeve. It takes a...

Weld On Differential Armor Protect your differential gears from unnecessary damage. Trail-Gear now offers weld on differential Armor for 2007-2013 FJ Cruiser. Precision Laser Cut from 1/4" A36 Steel, then CNC formed to provide the best protection...

Rock Assault Steering Stops A good set of steering stops is critical so that your steering does not over travel and damage other steering or axle components. Our Rock Assault steering stops are machined from solid billet so you will never have to worry...

26" Extended Brake Line (Front / Female - Female) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size:...

26" Extended Brake Line (Rear / Female - Male) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size...

Mini Install Kit This mini install kit covers your basic installation requirements. Kit Includes: Crush Collar Rear Pinion Seal Pumpkin Gasket Shim Kit Contact our Tech Support Line for further information at 928-575-2174. Note:...