Clutch Alignment Tool Used to align splines of disc to pilot bearing for a clutch install. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent...

Pressure Plate Bolt Pressure plate bolts play an important role in the performance and safety of race cars and street machines alike. That's why LC Engineering recommends replacing yours whenever you change your pressure plate. OEM Toyota Part #:...

Master Install Kit These parts are getting hard to find so get the whole kit to have a successful install. Kit Includes: Carrier Bearings (2), see Part #: 1091222 Pinion Bearing Retainer Shims, see Part #: 1091227 Rear Pinion Bearing, see Part #: ...

Pinion Head Bearing The 6.7" Toyota differential is becoming increasingly more difficult to find parts for. Fortunately, LC Engineering has come to the rescue with some replacement parts for these Celica rear ends. This is the bearing that rides on the...

Carrier Bearing (Pinion Side) Carrier bearing for the 6.7" Celica differential. The 6.7" Toyota differential is becoming increasingly more difficult to find parts for. Fortunately, LC Engineering has come to the rescue with some replacement parts for...

Shaft Tail Bearing (Rear Pinion) This bearing is for the end of the pinion gear, closest to the splines. The 6.7" Toyota differential is becoming increasingly more difficult to find parts for. Fortunately, LC Engineering has come to the rescue with...

Crush Collar Replacement crush collar for the 6.7" Celica differential. The 6.7" Toyota differential is becoming increasingly more difficult to find parts for. Fortunately, LC Engineering has come to the rescue with some replacement parts for these...

Rear Pinion Seal The pinion seal will need to be replaced any time the gear ratios are changed. This pinion seal is a high quality oil seal that will offer you years of service. The 6.7" Toyota differential is becoming increasingly more difficult to...

Pumpkin Gasket New gasket to seal the pumpkin to the housing on the 6.7" Celica differential. The 6.7" Toyota differential is becoming increasingly more difficult to find parts for. Fortunately, LC Engineering has come to the rescue with some...

Shim Kit Shim kit for setting up gears in 6.7" Celica differentials to get the correct gear mesh pattern. The 6.7" Toyota differential is becoming increasingly more difficult to find parts for. Fortunately, LC Engineering has come to the rescue with...

Mini Install Kit This mini install kit covers your basic installation requirements. Kit Includes: Crush Collar Rear Pinion Seal Pumpkin Gasket Shim Kit Contact our Tech Support Line for further information at 928-575-2174. Note:...

Nylon Shift Lever Bushing (End of the Handle) If your shifter on your manual transmission is loose and sloppy, this bushing is in need of replacement. This is an OEM nylon cup that fits over the ball end of the shift lever (transmission side). We...