-
Underdrive Belt (Pro 7" Kit) This belt is used on the LC Engineering Pulley Kit for the 7" Water Pump and the 4" Crank Pulley without alternator assembly. Contact our Tech Support Line for further information at 928-575-2174. Note: Images...$15.49 -
Underdrive Belt (Pro 7" Kit) This belt is used on the LC Engineering Pulley Kit for the 7" Water Pump and the 4" Crank Pulley with alternator assembly. Contact our Tech Support Line for further information at 928-575-2174. Note: Images...$15.47 -
Pro Block Brace Kit We're pretty sure when Toyota designed the 20R or 22R series engines; they weren’t expecting people to build them up to 185+ horsepower and torque. Over the years as we developed a full line of high-performance 20R and 22R...$203.48 -
Water Block Plate (Center Of Head) If you are installing an Offenhauser intake (or if you are eliminating the heater core), there won't be room for the heater core outlet off the cylinder head. This water block plate goes in the center of the cylinder...$16.17 -
Fuel Pump Block Plate Kit This block off plate blocks the hole on the front of the cylinder head where a manual fuel pump would mount. Perfect for if you are using an electric fuel pump on an engine that originally had a manual pump installed. ...$17.25 -
Water Block Plate (Timing Cover Passenger Side) This block plate goes on the passenger side of the timing cover. Perfect for eliminating the unnecessary water hoses going around your engine compartment. Contact our Tech Support Line for...$16.17 -
Water Block Plate (Timing Cover Driver Side) This block plate goes on the driver's side back of the timing cover which is for deleting the factory heater return line on most 22's. Contact our Tech Support Line for further information at...$16.17 -
Pro Water Block Plate Kit This water block plate kit is perfect when trying to eliminate some of the un-necessary water lines on some applications. This kit will come with a block plate for the center of the head (Offenhauser manifolds will need this),...$26.99 -
Brass Freeze Plug At the beginning of any complete engine build-up, the block needs to be cleaned. To do that, all of the block's plugs must be removed (even with a new engine) to allow cleaning access to areas that enable oil or coolant to flow. LC...$17.09 -
Complete Gasket Set Head gasket failure is one of the most common problems with the Toyota four-cylinder engines. With a cast iron block and an aluminum cylinder head, add a little heat, and you have two entirely different metals expanding and...$135.30 -
Underdrive Pulley (4" Triple Groove) Underdrive pulleys are an excellent addition for just about any high RPM performance application. The lightweight of these billet aluminum pulleys will reduce the drag on your engine, while the underdrive design...$142.42 -
Water Pump Pulley (Billet 6") The 6" polished Underdrive Pulleys can reduce water pump RPM and dress up the front of your engine. These pulleys are CNC machined from billet 6061 T-6 aluminum bar stock and cut with performance lightening holes to reduce...$73.86
-
fast shipping
Speed Delivery