-
Underdrive Belt (Pro 7" Kit) This belt is used on the LC Engineering Pulley Kit for the 7" Water Pump and the 4" Crank Pulley without alternator assembly. Contact our Tech Support Line for further information at 928-575-2174. Note: Images...$15.49 -
Underdrive Belt (Pro 7" Kit) This belt is used on the LC Engineering Pulley Kit for the 7" Water Pump and the 4" Crank Pulley with alternator assembly. Contact our Tech Support Line for further information at 928-575-2174. Note: Images...$15.47 -
Clutch Slave Cylinder The clutch slave cylinder is typically located on the side of the transmission. The clutch slave cylinder receives hydraulic pressure from the clutch master cylinder which pushes the slave cylinder shaft out to actuate the clutch...$15.40 -
OEM Radiator Fan Shroud Clip (1979-1998 4Runner/Pickup/Celica/Tacoma/T100) OEM Radiator Fan Shroud Clip. OEM Toyota Part #: 90468-06013 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...$15.39 -
20 Amp Rocker Switch (Blue) Designed for use with Daystar's Switch Panels, these OE-quality rocker switches can handle the switching duties of most aftermarket accessories. They also fit selected switch blanks present on some OE dashes...$15.00 -
Weld On Bung & Plug Kit (Thread-In Bosch Style) If you are installing an oxygen sensor in a system that didn't originally come with one, or if you are installing a stand-alone Wideband AFR gauge, you will need this kit. It comes with the bung (18mm...$14.95 -
Grommets & Washers (Sway Bar End Link) Improved handling, low cost, and easy installation are just some of the reasons these components are so popular! These sway end link grommets offer the greatest improvement in performance handling on trucks...$14.95 -
Piston Ring Installation Pliers This deluxe piston ring expander will support the ring all the way around. This will help in not distorting the ring and cut down on breakage. This tool will save time and money. Contact our Tech Support Line for...$14.42 -
Oxygen Sensor Install Kit (2-Bolt Style) This kit contains everything you need to install the factory 2-bolt O2 sensor into your custom exhaust. It allows you to weld in the O2 sensor wherever you want it in the exhaust. Kit Includes: (2) Studs and...$13.87 -
2-Bolt Flange (2 1/4") Steel flange designed for connecting to our header collectors. This is perfect if you are fabricating your own exhaust from the header back. 3/8" thick, for 2-1/4" exhaust tubing. Contact our Tech Support Line for further...$13.87 -
Recessed 10mm Allen Socket (3/8" Drive) This 10mm x 3/8" Drive Recessed Allen Socket is specifically designed to work with the Magnetic Drain Plugs, see Part #'s: 2053160 and 2053162. This product should not be used in a manner that violates...$13.81 -
2 1/4" Radiator Cap (Large) This Sankei OEM style Japan Radiator Pressure Cap that directly replaces the factory caps. The cap is 100% Stainless Steel and is a 13 pound cap or 0.9 kg/cm. Toyota used two styles of radiator caps the large one that...$13.63
-
fast shipping
Speed Delivery