Brass Freeze Plug Set When completing any engine rebuild, the block needs to be cleaned. To be thorough, when cleaning out your block, all of the core plugs must be removed to allow complete access to areas that carry oil or coolant. There are a few...

Pro Water Block Plate Kit This water block plate kit is perfect when trying to eliminate some of the un-necessary water lines on some applications. This kit will come with a block plate for the center of the head (Offenhauser manifolds will need this),...

Metal Backed Timing Chain Guides (Dual Row) Used on all 20r and 81-82 22r engines from the factory. LC Engineering uses factory OSK metal-backed guides to address the common breakage problem of the plastic guides on 83-84 factory single row engines...

Timing Cover Hardware (Dual Chain Applications) Timing Chain Bolt Kits for the early dual-row cover or the LC Engineering dual row conversion kit. All Hardware is zinc plated, or black oxide coated. This is the hardware used in the Timing Chain...

Timing Cover Hardware (Single Chain Kit) This kit is all the hardware you will need for the installation of the late model Timing Chain Cover in most applications. All hardware is zinc plated, or black oxide coated. NOTE: This kit will not address any...

Power Steering Belt (1981 - 1995) Pickup & 4Runner 22R/RE/RET This high Performance V-Belt is designed with being a workhorse in mind, the polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The...

Gasket Set (Timing Chain Cover) High-quality timing cover gasket set for (85-95) 22R and 22RE engines. Does not fit early (75-84) blocks, for those engines, use Part #: 1015045. Contact our Tech Support Line for further information at...

Water Block Plate Kit (Cylinder Head-Rear) This block plate is used primarily on our billet race motors to block off the water passage on the back of the cylinder head. Contact our Tech Support Line for further information at 928-575-2174...

Oil Pump Drive Spline (Single Row) If you're replacing the single timing chain on your early Toyota motor (83-84) with the more desirable dual-row chain, you will need a dual row drive spline to make it all work right. OEM Toyota Part #:...

Engine Rebuild Oil Galley Plug Kit Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off after cleaning. LC Engineering can supply you with all these hard to find plugs. Most engines have some sort of...

Fuel Pressure Bolt Kit Ever wonder if the fuel regulator is doing its job? Not sure if you're getting the right fuel pressure at the fuel rail? This new fuel bolt kit is the solution to the problem. This kit will replace the banjo bolt on the cold start...

PCV Hose This is the OEM 22RE PCV hose for the PCV Valve on top of the valve cover. OEM Toyota Part #: 12261-35011 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...