Water Block Plate Kit (8 Bolt / Under Intake) This water plate will fit on any 22R carbureted manifold with the 8-bolt design underneath it. This plate works with stock manifolds or aftermarket designs. You will need to verify the bolt count on the...

Water Block Plate Kit (11 Bolt / Under Intake) This water plate will fit on any 22R carbureted manifold with the 11-bolt design underneath it. This plate works with stock manifolds or aftermarket designs. You will need to verify the bolt count on the...

Water Block Plate Kit (9 Bolt / Under Intake) This is the 9 bolt style water plate for the bottom of the 20R Cannon Downdraft Manifold. This kit comes with a billet aluminum water plate, mounting hardware, 3/8" npt plug and 90 degree fitting with a...

Oil Filter Adapter Inlet Plate (w/ O-Ring) On the big and bad race engines, we go with different oiling set up than the factory will use. This may include multiple filters, accumulation tanks, coolers, one-way valves you name it we have done it. This...

Pro Water Block Plate Kit This water block plate kit is perfect when trying to eliminate some of the un-necessary water lines on some applications. This kit will come with a block plate for the center of the head (Offenhauser manifolds will need this),...

Water Block Plate Kit (Cylinder Head-Rear) This block plate is used primarily on our billet race motors to block off the water passage on the back of the cylinder head. Contact our Tech Support Line for further information at 928-575-2174...

Air Injection Block Plate Kit This plate kit will block off the holes on top of the exhaust manifold or header. Kit Includes: (2) Stainless Steel plates (2) Gaskets NOTE: Not for use on smog checked vehicles, fits LC Headers or header flanges...

22RE Cold Start Injector Block Plate Kit (22RE EFI Intake Manifold) This kit is designed to allow you to safely block of the cold start injector and supply when you are upgrading your efi system to a stand alone fuel management. NOTE: For a complete...

Fuel Pump Block Plate Kit This block off plate blocks the hole on the front of the cylinder head where a manual fuel pump would mount. Perfect for if you are using an electric fuel pump on an engine that originally had a manual pump installed...

Water Block Plate (Timing Cover Passenger Side) This block plate goes on the passenger side of the timing cover. Perfect for eliminating the unnecessary water hoses going around your engine compartment. Contact our Tech Support Line for...

Water Block Plate (Under EFI Manifold) This water block off plate goes under the intake manifold on fuel-injected 22RE engines. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...

Water Block Plate (Center Of Head) If you are installing an Offenhauser intake (or if you are eliminating the heater core), there won't be room for the heater core outlet off the cylinder head. This water block plate goes in the center of the cylinder...