Viton Valve Seals Viton Valve Seals are the latest in valve seal material, surpassing Teflon! Heat resistant to 440 degrees, they eliminate oil consumption through the valve guide and provide smoother engine idling by stopping manifold air and oil...

Viton Valve Seals Viton Valve Seals are the latest in valve seal material, surpassing Teflon! Heat resistant to 440 degrees, they eliminate oil consumption through the valve guide and provide smoother engine idling by stopping manifold air and oil...

Pro HD Dual Valve Springs (High RPM / High Boost) If you're building a 2.4L 2RZ-FE or a 2.7L 3RZ-FE these Pro Dual Valve Springs are a "must-have" upgrade when running bigger lift cams and higher RPM's. With 100lbs of seat pressure at a 1.400" install...

OE Valve Springs These are OE Valve Springs to get your spring rate back to factory specifications. If you are looking for an upgraded spring or running anything other than the factory cams, reference Part #: 1023238 for our Street Performer Valve...

OEM Retainer (Single Spring) Our Street Performer retainers are an excellent OEM replacement that matches our street performer valve springs perfectly. If you have a mild street motor that doesn't need anything exotic in the valvetrain, these retainers...

Street Performer Retainer (Single Spring) Our Street Performer retainers are an excellent OEM replacement that matches our street performer valve springs perfectly. If you have a mild street motor that doesn't need anything exotic in the valvetrain,...

Valve Springs (Street Performer) The Street Performer Springs will control your valves up to 5,500 RPM, with a valve lift of .450". NOTE: The proper set of matched valve train components will eliminate most valve train problems. The LC Engineering...

Pro Head Studs The ARP Cylinder Head Stud Set is a must for engines with increased cylinder pressure from high compression, nitrous oxide, turbocharged and supercharged applications. Made from 8740 Chromoly Steel, these studs test out at over 190,000...

Billet Oil Cap (Cog Style) Give your engine a little "zing" under the hood with this all-new Billet Aluminum Oil Cap. Our unique caps are made from quality 6061 T-6 aluminum billets, CNC machined with a brushed finish. NOTE: It will come with a new...

Breather Hose (Front Of Valve Cover) OEM Toyota hose comes off the valve cover and goes to intake manifold. OEM Toyota Part #: 12262-35060 NOTE: Not for carbureted applications, for carbureted models, see Part #: 1072413 (1984), or Part #: ...

Spark Plug Tube Seal This gasket seals the spark plug tube to the valve cover to keep oil from contaminating the spark plug boots. NOTE: Sold individually. Contact our Tech Support Line for further information at 928-575-2174. Note:...

OEM Cylinder Head Bare Casting (8 Port) After testing numerous aftermarket head castings, we have come to the conclusion that the stock OEM Toyota casting is far superior to any other casting. This is the only casting we use for our cylinder heads,...