H.D. Extra-Flex Extended Front Leaf Springs
(5″ Lift)
Now the front 5" springs are available in a heavy duty version with a 25% higher spring rate. These have an additional 7th leaf and the length of the leaves has been readjusted to match. If you are running a larger V-6 or V-8 motor, you will appreciate the extra weight carrying capacity of these springs. Trail-Gear leaf springs are flexible on the trail yet hold their lift year after year.
Features:
- Springs are pre cycled and lot tested to maintain quality
- Nylon pads between the leaves reduce noise and allow springs to flex more easily
- Raised clamp assemblies prevent binding of the leafs within the pack
- Dual-pass shot-peened to relive material stress
- Our front springs feature a full military wrap on the front
- Spring rate is 220 lbs per inch
- Leaf pack contains (6) leaves
- Springs are 47" long as measured along the top leaf
- New poly bushings and left side spring pad are included with springs
NOTE: Pin to center of front mount is 22" and pin to the center of the shackle mount is 25". 2 1/4" width springs. Requires the use of U-bolt flip kit, see Part #: 2053165 (79-83), or 2053169 (84-85), and a spring hanger kit, see Part #: 2053100.
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
by Trail-Gear
- 1975-1985 Pickup (4x4)
- 1981-1985 4Runner (4x4)
- 1986-1995 Pickup w/ Solid Axle Swap
- 1986-1995 4Runner w/ Solid Axle Swap
