Flex Fan w/ Billet Spacer Kit
Flex-a-lite high performance flex fans are designed to give you maximum airflow at low RPM, and the least amount of engine loading at high RPM. Less resistance at highway speeds equals more horsepower and better gas mileage. Flex fans pull additional air through the radiator at low RPM when the speed of the vehicle isn't enough to cool the engine's coolant system. At higher RPM, when the vehicle's speed forces ample air through the radiator, the fan blades flatten out, resulting in less power being used to spin the fan.
NOTE: By design, Flex Fans are noisier compared to a stock fan. Noise will not be a valid reason for the return of this item.
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
- 1988-1995 3VZ 3.0L Engines
Kit Includes:
- (1) Billet Fan Spacer
- (4) M8-1.25 x 16mm Hex Bolts
- (8) M8 Flat Washers
- (4) M6-1.25 x 30mm Hex Bolts
Installation:
- Loosen bolts that hold the fan to the water pump. Do not remove them just loosen them while the belt is still on to make removal easier.
- Remove water pump belt and then remove the fan assembly from water pump. You can also remove the fan shroud for extra room but this is not necessary.
- Remove stock fan studs in water pump and chase hub threads with a tap.
- Install the flex fan on the fan spacer using M8 Hex Bolts and M8 flat washers. Use a mild thread locking compound on bolts.
- Install hub and fan assembly on the water pump flange using the M6 hex bolts and M6 flat washers.
- Rotate engine by hand, checking for fan clearance before starting engine.
2 Reviews Hide Reviews Show Reviews
-
.
Fits really well. Nicely made. Not to loud a lot quieter then I had figured it would be.
-
3vz Flex Fan performance
Very straight-forward install, and i received it faster than anything I've ever received before, which was very impressive. Fan is of good quality. Robs a little bit of power on the low end, but keeps the temp gauge much further down than it was before. Plus it sounds pretty cool, and looks mint.