O-Ring (Oil Pump) The oil pump O-ring seals and mates the surfaces to keep oil in its respective place. Over time O-rings become brittle and break. Replace a leaky or corroded O-rings before severe damage occurs. Contact our Tech Support Line for...

MLS Head Gasket (96mm Bore x .051"Thick) The cylinder head gasket is arguably the most critical seal in an automotive engine. Since the release of the internal combustion engine, gasket designers have specified many materials to meet this significant...

Oil Pump Crankshaft Front Seal New OEM quality Oil Pump Crankshaft Seal. Eliminate those pesky front oil leaks by replacing the old brittle seal with this new high-quality seal. Contact our Tech Support Line for further information at...

Turbo Compressor Outlet Gasket (CT20) This is a replacement for the OEM turbo compressor outlet gasket for 22RET engines with the CT20 Turbo. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line...

OEM Pick-Up Tube Gasket (Oil Pan) This gasket seals the oil pickup to the block. Guarantees the oil makes it into the pump instead of leaking back into the pan. OEM Toyota Part #: 15147-75020 Contact our Tech Support Line for further...

Water Pump Gasket (OEM) Gaskets seal and mate surfaces between various components to keep oil, coolant, air, and fuel in their respective places. Over time gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs...

Heater Tube O-Ring (Under EFI Manifold) The O-ring seals the heater tube under the EFI intake manifold. Over time O-rings become brittle and break. Replace a leaky or corroded O-rings before severe damage occurs. This is OEM toyota part and may not...

Turbo Discharge Gasket (CT20) This is a replacement for the OEM turbo discharge gasket for 22RET engines with the CT20 Turbo. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...

Idle Air Compensator Valve O Ring This is the OEM rubber o ring gasket that is used on the 1995 to 2000 Toyota 3RZ throttle bodies for the IAC valve. What is an IAC it is an idle air compensator valve directly associated with the idle control on the...

Idle Air Compensator Valve O-Ring This is the OEM rubber o ring gasket that is used on the 2000-2004 Toyota 3RZ throttle bodies for the IAC valve. What is an IAC it is an idle air compensator valve directly associated with the idle control on the 3RZ...

OEM EGR Crossover Gasket OEM Gasket for that EGR Crossover plate located on the back side of the cylinder head. OEM Toyota Part #: 11182-35050 Contact our Tech Support Line for further information at 928-575-2174. Note: Images...

MLS Head Gasket (LH Only) (95mm Bore x .051" Thick) The cylinder head gasket is arguably the most crucial seal in an automotive engine. Since the release of the internal combustion engine, gasket designers have specified many materials to meet this...