Header Stud Set
The factory exhaust manifold studs have a shoulder in the center that can interfere with proper header tightening. Our 10mm x 1.25 x 48mm long, heat-treated plated header mounting studs are stronger than stock. Works with a stock manifold or any header.
Kit Includes:
- (8) Studs
- (8) Mechanical locking nuts
NOTE: Torque to 33 Ft. Lbs. The short side of the stud will go into the head.
| Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501. |
- 1975-1980 20R 2.2L Engines
- 1981-1995 22R 2.4L Engines
- 1983-1995 22RE 2.4L Engines
- 1995.5-2004 2RZ 2.4L Engines
- 1995.5-2004 3RZ 2.7L Engines
To open a printable PDF version of this instruction CLICK HERE
Kit Includes:
- (8) 48mm Harden Zinc Coated Stud
- (8) M10 x 1.25 Mechanical Locking Flange Nut
Installation:
-
1. Remove original studs from head. If the old studs are difficult to remove use a penetrating lubricant and let soak overnight before attempting to remove.
2. The shorter threaded portion of the stud will be installed into the head. The stud will be installed in the head hand tight.
3. The locking flange nut will be torqued to 33 Ft. Lbs. LC Engineering headers and exhaust gaskets DO NOT Require the use of any sealant. If a silicone sealant will be used, make sure it is oxygen sensor safe.
Double Nut Stud Installation And Removal Technique:
Simply take (1) 10mm x 1.25 nut and thread half way on the one of the studs. Take the another 10mm nut, then thread that onto the same stud and make sure the 2 nuts are tightened against one another. Now take your box wrenches and put one on the first nut, and the other on the second nut tightening them against one another. After they are locked together, take the one wrench and place it on the nut closest to the block, and proceed to free the stud from the block. Reverse for installation.
210 Reviews Hide Reviews Show Reviews
-
Stud set
Stud set works great.
-
Wham Bam Done. Solid deal
1/4 the cost of the pirates telling you exhaust manifold nuts and studs need to be OEM.
-
Very satisfied
Shipping was fairly fast quality parts no complaints
-
Doug Braxton give 5 stars
-
Mark Vandine give 5 stars
-
Let me tell you again
Really holds all the power down🤙ðŸ½
-
Looking forward to trying these gaskets
I have not yet had a chance to put these parts on my 93 Toyota pick up truck but everything looks right and when I called about some clarity on some exhaust gaskets, the staff member was very helpful. I’m looking forward to fitting these parts very, very affordable.
-
Curtis Lacey give 5 stars
A must have when installing an exhaust header.
-
Ignacio Lopez give 5 stars