INTAKE

Injector Harness Adapter (Denso to Bosch EV1) This injector harness adapter installs between the stock injector plug and a new fuel injector with no cutting or splicing required. This is the cleanest way for you to install an aftermarket fuel injector...

Fuel Injector Caps (Green Cap) Replace those old brittle troublesome caps with a new set through LC Engineering. For installation, we recommend placing the caps in hot water then pushing them on to the injector. NOTE: Sold as a set of (4). For Type C...

Accelerator Pump Jet Replacement accelerator pump jet for the Weber DCOE (Sidedraft) carburetor. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not...

Intake Manifold Stud Kit This kit comes with all new studs to mount your manifold to your cylinder head. Replacing your stock intake bolts with studs will allow you to remove and reinstall your manifold numerous times without having to worry about...

Fuel Injector Top Grommets This is a new set of fuel injector grommets that go on the top of the fuel injector. Stop pesky fuel leaks at the fuel rail by replacing these grommets. NOTE: Sold as a set of (4). Contact our Tech Support Line for...

Teflon Heat Isolation Gasket (Throttle Body) Teflon Heat Isolator kits keep the power-robbing heat away from the intake air. By keeping the heat out of the intake manifold, the incoming air is cooler, therefore making more power. This is the ultimate...

Idle Air Compensator Valve O-Ring This is the OEM rubber o ring gasket that is used on the 1989 to 1995 Toyota 22RE throttle bodies for the IAC valve. What is an IAC it is an idle air compensator valve directly associated with the idle control on the...

Air Intake Tube Clamp Need to connect the air intake duct and secure it properly? Simply get these clamps into place, and snug it down. Nothing makes a job easier than having proper fitting replacement parts. Look no further, LC has you covered. OEM...

Weber Main Jet (1.25) Weber calibrated main jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the results are excellent. We recommend Weber...

Idle Air Compensator Valve O-Ring This is the OEM rubber o ring gasket that is used on the 2000-2004 Toyota 3RZ throttle bodies for the IAC valve. What is an IAC it is an idle air compensator valve directly associated with the idle control on the 3RZ...

Weber Sidedraft Main Jet (Range: 1.10-1.55) Weber calibrated main jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the results are excellent...

Weber Sidedraft Main Jet (Range: 1.60 - 2.05) Weber calibrated main jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the results are...