INTAKE

Weber Main Jet (Range: 1.15-1.55) Weber calibrated main jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the results are excellent. We...

Weber Main Jet (Range: 1.60-2.00) Weber calibrated main jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the results are excellent. We...

Weber Primary Idle Jet 0.40 ("Fat Jet / Range: 0.40-0.90) Weber calibrated idle jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the results...

Weber Secondary Idle Jet ("Skinny Jet" / Range: 0.40-0.80) Weber calibrated idle jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the...

Weber Downdraft Air Correction Jet (Range: 1.35-1.80) Weber calibrated air correction jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the...

Weber Air Correction Jet (Range: 1.85-2.20) Weber calibrated air correction jets are a legendary component that meters air to the emulsion tube well. Weber is without question the most popular for performance applications. In good tune, the results are...

Primary Idle Jet Holder (w/ O-Ring) This Weber jet holder holds the primary fat jet into the main housing on Weber 32/36 and 38 downdraft carburetors. Contact our Tech Support Line for further information at 928-575-2174. Note: Images...

Secondary Idle Jet Holder (w/ O-Ring) This Weber jet holder holds the secondary skinny jet into the main housing on Weber 32/36 and 38 downdraft carburetors. Contact our Tech Support Line for further information at 928-575-2174. Note:...

Idle Air Compensator Valve O Ring This is the OEM rubber o ring gasket that is used on the 1995 to 2000 Toyota 3RZ throttle bodies for the IAC valve. What is an IAC it is an idle air compensator valve directly associated with the idle control on the...

Throttle Linkage (Nut & Tab Washer) Have you lost your linkage bracket nut? No stress LC Engineering has you covered. We offer this kit to make your life a little easier. It will include one M8 x 1.0 nut as well as one Tab Washer to keep it from...

22RE Fuel Pressure Damper Washer This fuel damper washer is a stock replacement for the worn out one. You will need (1) as well as (1) of these 1025050 washers for each damper. NOTE: Sold individually. Contact our Tech Support Line for further...

Throttle Shaft Nut Have you lost your linkage shaft nut? No stress LC Engineering has you covered. We offer this to make your life a little easier. Don’t wait until it is too late, grab one today. Contact our Tech Support Line for further...