Temperature Gauge Sender This Temperature Gauge Sender is a stock replacement for 22RE engines. After years of use, electric components can go bad and give false readings, that is why we recommend replacing them with new ones, for accurate readings...

Coolant Temperature Sensor (Square Plug) This Temperature Sensor is a stock replacement for 22RE engines. After years of use, electronic components can go bad and give false readings, that is why we recommend replacing them with new ones for accurate...

OE Oil Pressure Gauge Sender This Oil Pressure Gauge Sender is a stock OE replacement for 22RE & 3VZ engines. After years of use, electric components can go bad and give false readings to the ECU, that is why we recommend replacing them with new...

OE Oil Pressure Gauge Sender This Oil Pressure Gauge Sender is a stock OE replacement for 22RE and 3VZ engines. After years of use, electric components can go bad and give false readings to the ECU, that is why we recommend replacing them with new...

OEM Sealing Washer This sealing washer for sensors is an OEM stock replacement for Toyota engines. OEM Toyota Part #: 90430-12005 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...

Crush Washer This Crush Washer is a stock replacement for the worn out ones on the Cold Start Injector on Toyota engines. Sold as each. You will need (2) for each cold start injector. NOTE: Sold individually. Contact our Tech Support Line for...

Cold Start Injector Time Switch (OEM) LC Engineering only offers the best quality available when it comes to parts, that is why we offer a wide selection of OEM parts, only to ensure that you get the best fitment and the longer lasting parts in the...

OEM Cold Start Injector Time Switch LC Engineering only offers the best quality available when it comes to parts, that is why we offer a wide selection of OEM parts, only to ensure that you get the best fitment and the longer lasting parts in the...

-6AN Fuel Rail Fitting (Fuel Inlet) LC Engineering offers this fitting that threads into your stock fuel rail inlet on your 22RE/22RET. It comes with an O-ring and a crush washer. NOTE: M14 x 1.50 to -6AN fitting. We also sell replacement Fuel Rails...

-6AN Fuel Rail Fitting (Aftermarket Fuel Regulator) Need to connect your Aftermarket Fuel Pressure Regulator to your fuel rail? LC Engineering offers this fitting that goes right into your own fuel rail on your 22RE/22RET. With this fitting there is no...

OEM Throttle Body Elbow/Hose (Rubber) This rubber elbow is an OEM part from Toyota, from the intake to the throttle body. This elbow tends to crack with normal wear and tear, especially in extreme climates. OEM Toyota Part #: 22231-35030 NOTE: ...

Union Bolt (Fuel Rail) LC Engineering offers this M14 x 1.25 replacement Union Bolt that threads into the front of your fuel rail. This also replaces the fuel damper on early 22RE fuel rails. Contact our Tech Support Line for further information...