Fuel Injection Accessories

Coolant Temperature Sensor This coolant temperature sensor is a stock replacement for 22RE/RTE engines. After years of use, a sensor can go bad and give false readings to the ECU, that is why we recommend replacing those sensors that have been sitting...

-6AN Fuel Rail Fitting (Fuel Inlet) LC Engineering offers this fitting that threads into your stock fuel rail inlet on your 22RE/22RET. It comes with an O-ring and a crush washer. NOTE: M14 x 1.50 to -6AN fitting. We also sell replacement Fuel Rails...

Union Bolt (Fuel Rail) LC Engineering offers this M14 x 1.25 replacement Union Bolt that threads into the front of your fuel rail. This also replaces the fuel damper on early 22RE fuel rails. Contact our Tech Support Line for further information...

Temperature Gauge Sender This temperature sender is a stock replacement for 22RE engines. After years of use, electric components can go bad and give false readings to the ECU, that is why we recommend replacing them with new ones, for accurate...

Oil Pressure Light Switch This Oil Pressure Light Switch is a stock replacement for 22RE engines and it is only for vehicles with stock oil pressure light on the dashboard, not for gauge. After years of use, electric components can go bad and give...

Teflon Heat Isolation Gasket (Throttle Body) Teflon Heat Isolator kits keep the power-robbing heat away from the intake air. By keeping the heat out of the intake manifold, the incoming air is cooler, therefore making more power. This is the ultimate...

Air Intake Tube Clamp Need to connect the air intake duct and secure it properly? Simply get these clamps into place, and snug it down. Nothing makes a job easier than having proper fitting replacement parts. Look no further, LC has you covered. OEM...

22RE Fuel Pressure Damper Washer This fuel damper washer is a stock replacement for the worn out one. You will need (1) as well as (1) of these 1025050 washers for each damper. NOTE: Sold individually. Contact our Tech Support Line for further...

OEM Vent Hose Spring Clamp Need to connect the vent hose and secure it properly? Simply get these spring clips into place, and release. Nothing makes a job easier than having proper fitting replacement parts. Look no further, LC has you covered. OEM...

OEM Sealing Washer This sealing washer for sensors is an OEM stock replacement for Toyota engines. OEM Toyota Part #: 90430-12005 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...

Crush Washer This Crush Washer is a stock replacement for the worn out ones on the Cold Start Injector on Toyota engines. Sold as each. You will need (2) for each cold start injector. NOTE: Sold individually. Contact our Tech Support Line for...