Valve Train Kit (Pro Cylinder Head) The Pro Series cylinder heads are designed as a stock replacement with some mild performance upgrades. Now you can refresh your old cylinder head and make it a Pro with this kit. Great for any stock application or...

Base Gasket (Pair) Avoid or fix annoying vacuum leaks by replacing the base gaskets between your carburetor and intake manifold. We recommend this genuine Red Line Weber gasket to be replaced any time the carburetor is removed from the manifold...

NEW Anodized Fuel Rail (Black) LC Engineerings CNC-machined anodized fuel rails are perfect for that show truck looking to get the "edge" on the competition when the hood is popped. The fuel rails feature OEM factory mount locations to allow anyone who...

Breather Hose (Front Of Valve Cover) OEM Toyota hose comes off the valve cover and goes to intake manifold. OEM Toyota Part #: 12262-35030 NOTE: Not for carbureted applications. For carb applications, see Part #: 1072413 (1984 only), or Part #: ...

Differential Drop Spacer Kit Lifting a Tacoma, Tundra, Sequoia or 4Runner increases the angles on the CV joints and boots, which accelerates wear. These solid aircraft-grade 6061-T6 aluminum spacers and zinc-plated Grade 8 hardware move the front...

Vented Non-Cross Drilled Rotor Toyota Pick-Ups and 4Runners (86+) feature larger vented rotors from the factory. Earlier (79-85) trucks used solid, non-vented rotors up front along with smaller calipers. If you're installing a solid front axle on an...

Front Leaf Spring Hanger This hanger is used to as a front mount for our 47" front leaf springs. Hanger is included in IFS Eliminator and Classic Lift kits. NOTE: Kit does not include bolts and bushings . This product should not be used in a...

Upper Link Frame Bracket (Front 3-Link) This is the Upper Link Frame Bracket that attaches to the passenger side of the frame. The link goes on the inside of the frame. This product should not be used in a manner that violates Federal EPA Laws...

Round Collector Exhaust Gasket Set This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. In the stock application, two will be required, this is a kit and will include (2) gaskets. Alternate exhaust...

Trail-Link Four Crossmember You will need this crossmember if you are looking to put your own kit together. It is designed to fit between a frame width of 36.69". This product should not be used in a manner that violates Federal EPA Laws. Contact...

+4" HD Front Leaf Spring (For V6 and V8 Applications) Our front 3", 4", and 5" springs are now available in a heavy-duty version with a 25% higher spring rate. The HD leaf springs are great for heavier trucks and 4Runners with full bodies and...

+3" HD Front Leaf Spring Our front 3", 4", and 5" springs are now available in a heavy-duty version with a 25% higher spring rate. The HD leaf springs are great for heavier trucks and 4Runners with full bodies and exo-cages, V6 Toyota and Tacoma...