Turbo Compressor Outlet Gasket (CT20) This is a replacement for the OEM turbo compressor outlet gasket for 22RET engines with the CT20 Turbo. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line...

Adapter Plate This adapter plate allows one or more gear driven transfer case(s) to be bolted up to 1988-1995 Toyota 3.0L V6 5 speed transmissions. Our updated design does not require modification to the transmission for installation thanks to the use...

Shift Detent Bolt (Heavy Duty Transfer Case) The stock transfer case shift springs tend to give a sloppy feel to the shifters and can lead to the transfer case shift lever popping out of gear on the trail. We recommend heavy duty shift springs be used...

Transfer Case Shifter w/ Knob If you are going for the multiple transfer cases setup, you will need shifters too! Great replacement for your old or broken Toyota stock shifter. NOTE: Does not include shifter base, for shifter base (Top Shift), see...

Transfer Case Shift Base If you are going for the multiple transfer cases setup, you will need shifters too! Great replacement for your old or broken Toyota stock shifter. NOTE: Does not include shifter, for shifter, see Part #: 2051665. This...

Speedometer Extension Cable When installing a dual adapter, the position of the speedo output moves back about 6.5" from stock. We recommend using a speedo extension when connecting mechanical speedometer cables to a dual adapter. This product should...

High Pinion Conversion Kits W/ Gear Choices Now building and running a High Pinion differential is so affordable, we have put together a conversion kit that will allow you to use your current V6 locker with our complete High Pinion conversion kits,...

Dana 60 to Toyota Driveline Flange This is the flange all you Dana 60 lovers have been waiting for. It is forged from 5140 high strength steel, CNC machined, and triple drilled to match all of the popular Toyota driveline bolt patterns. This flange...

Matsuba Drive Shaft U-Joints (Stock Replacement) OEM Replacement U-Joint. We have tested these joints to 3700 ft-lbs of torque before failure. Includes four install clips and Zerk grease fitting. NOTE: Does not fit CV side of driveline. Contact...

26" Extended Brake Line Kit (2 Front / 1 Rear) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size:...

26" Extended Brake Line (Front / Female - Female) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size:...

26" Extended Brake Line (Rear / Female - Male) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size...