4Runner

Throttle Position Sensor Plug (w/ Wires) As time marches on Toyota will, little by little, discontinue parts it carries for the 22R/22RE powered trucks. We are here working hard to step in and make sure that the parts you need are still out there to...

Denso 5mm Spark Plug Wire Set (22R/RE/RET 1993-1995) Looking to replace your wires but don't need the "Performance" style? These would be the ones to choose. Denso is a leading name in replacement auto parts. Features: Mfr Label: 5mm Spark Plug Boot...

OEM Clutch Release Fork Sub-Assembly OEM Toyota OEM Clutch Release Fork Sub-Assembly. OEM Toyota Part #: 31204-35031 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...

Radiator Outlet Hose LC Engineering is now offering an OEM radiator outlet hose. OEM Toyota Part #: 16572-35030 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Coil Adapter Wire Special coil wire to connect a (93-95) coil to our pro distributor cap. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent...

Clutch Slave Cylinder The clutch slave cylinder is typically located on side of the transmission. The clutch slave cylinder receives hydraulic pressure from the clutch master cylinder which pushes the slave cylinder shaft out to actuate the clutch. One...

Street Performer Retainers Our Street Performer retainers are an excellent OEM replacement that matches our street performer valve springs perfectly. If you have a mild street motor that doesn't need anything exotic in the valvetrain, these retainers...

Valve Cover Gasket (OEM) These valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to...

T3 Inlet Turbo Flange (4-Bolt) This flange is constructed of 1/2" steel and has threaded holes for easy installation of your turbo. It is designed for any turbo that uses a T3 style inlet flange. Don't see what you need? Just call our Technical Dept...

Wastegate Block Off Kit (40mm V-Band) Fits LC Turbo Manifold This kit is designed to block the 40mm wastegate on LC's turbo manifold when using a turbo outfitted with an internal wastegate. Contact our Tech Support Line for further information at...

Timing Chain Tensioner Need to replace your chain tensioner and don't need the entire kit? LCE has you covered! Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Street Performer Retainer (Single Spring) Our Street Performer retainers are an excellent OEM replacement that matches our street performer valve springs perfectly. If you have a mild street motor that doesn't need anything exotic in the valvetrain,...