4Runner

LC Engineering Large Decal (26" X 8") Decals increase horsepower! Not really, but you can show the person behind you why you're in front! New limited edition old school Toyota decals. Contact our Tech Support Line for further information at...

Manual Hub Conversion Kit This kit is a must when converting from Toyota Automatic Hubs to Manual Hubs. This kit includes special locking nuts and plates that are necessary to lock the wheel hub and rotor onto the spindle when converting to manual hubs...

OEM PCV Valve Hose This is an OEM Toyota 3VZ hose for your PCV valve. OEM Toyota: 12261-65010 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not...

Thermostat (180 Degree) Reduced engine temperatures add life to your engine and provide a denser air/fuel mixture which helps produce more horsepower. Consistent control of engine temperature allows an engine to operate at its peak efficiency, no...

8" Oil Dipstick Tube (Shorty Style) This is a brand new oil pan dipstick tube. OEM part, direct from Toyota! Don't look any further for a new replacement dipstick tube to replace your old smashed or bent one. OEM Toyota Part #: 11452-35010 NOTE:...

Air Injection Tube Block-off Plate Kit (Trail Gear) Trail-Gear has come up with this very clean way to totally eliminate your stock air injection tube. This kit contains 2 plates that will allow you to install our headers without the air injection tube...

Weber Stock Air Cleaner (Replacement) This is a replacement air filter assembly for the Weber Downdraft 32/36 or 38 carburetors and contains chrome top and bottom, air filter, clips and hardware for a complete installation. NOTE: This is a...

Clutch Throw Out Bearing The classic symptom of a worn throw-out bearing is a whirring, growling, or chirping sound when applying the clutch pedal, which goes away after releasing the pedal. Premature wear of the throw-out bearing can occur when there...

Brass Freeze Plug At the beginning of any complete engine build-up, the block needs to be cleaned. To do that, all of the block's plugs must be removed (even with a new engine) to allow cleaning access to areas that enable oil or coolant to flow. LC...

Brass Freeze Plug Set When completing any engine rebuild, the block needs to be cleaned. To be thorough, when cleaning out your block, all of the core plugs must be removed to allow complete access to areas that carry oil or coolant. There are a few...

Stock Replacement U-Joint 4WD (Heavy Duty w/ Zerk) Looking for a top quality replacement U-Joint? This joint has been tested to 4,000 Ft.-Lbs. of torque in our axle testing machine. These joints are up to any task and will handle high output motors and...

Blow Off Valve Weld On Fitting (Race Port) This weld-on adapter is designed to work with our blow of valves when installing on intake tubes. This adapter will fit our Race Port blow off valves only. This adapter will not fit our Kompact series, Vee...