Front Sway Bar Bushings
(19mm)
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular! These sway bar bushings offer the greatest improvement in performance handling on trucks and sport utility...
Front Sway Bar Bushings
(23mm)
Improved handling, low cost, and easy installation are just some of the reasons these components are so popular! These sway bar bushings offer the greatest
improvement in performance handling on trucks and sport utility...
Engine Rebuild Oil Galley Plug Kit
Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off after cleaning. LC Engineering can supply you with all these hard to find plugs. Most engines have some sort of...
Fuel Pressure Bolt Kit
Ever wonder if the fuel regulator is doing its job? Not sure if you're getting the right fuel pressure at the fuel rail? This new fuel bolt kit is the solution to the problem. This kit will replace the banjo bolt on the cold start...
Shim Pack
(Six Shooter Knuckle)
Shim pack for 6-shooter knuckles. In order to maintain proper steering geometry and prevent binding or mis-alignment, we offer this assortment of shims.
Contact our Tech Support Line for further information at...
PCV Hose
This is the OEM 22RE PCV hose for the PCV Valve on top of the valve cover.
OEM Toyota Part #: 12261-35011
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration purposes only...
Breather Hose
(Front Of Valve Cover)
OEM Toyota hose comes off the valve cover and goes to intake manifold.
OEM Toyota Part #: 12262-35030
NOTE: Not for carbureted applications. For carb applications, see Part #: 1072413 (1984 only), or Part #: ...
Fuel Filter
When was the last time you changed your fuel filter? Toyota recommends changing it out every 30,000 miles, but some prefer changing theirs every 15,000 for many reasons. LC Engineering carries fuel filters for your Toyota. One of the most...
Temperature Gauge Sender
This Temperature Gauge Sender is a stock replacement for 22RE engines. After years of use, electric components can go bad and give false readings, that is why we recommend replacing them with new ones, for accurate readings...
Rear Main Seal
High-quality silicone seals with a double lip for improved sealing. If you have a big groove worn in the crankshaft seal surface, you'll need one of our seal savers for trouble-free installation without leaks. Be sure to wipe some engine...
LC Engineering T-Shirt
(22R)
Brand New Vintage Artwork! Show your support at the races or while you're out rock crawling with an LC Engineering t-shirt!
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images...
LC Engineering T-Shirt
(22R / Monster 4Runner / Celica)
Brand New Vintage Artwork! Show your support at the races or while you're out rock crawling with an LC Engineering t-shirt!
Contact our Tech Support Line for further information at...