4Runner

Thrust Bearing Set (Standard) These bearings for the 5VZ and 3VZ engines are factory replacement bearings. These factory replacement bearings offer the reliability and durability that you expect from LC Engineering. NOTE: No returns excepted on any...

Steering Box Fitting (High Pressure) This special fitting is used to connect the high pressure steering hose to the steering box. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further...

Street Distributor Cap New OEM style replacement distributor cap. A must when changing spark plug wires. Distributor caps can develop carbon tracks that can wreak havoc on the electrical path inside the distributor cap and cause drivability issues...

Heavy Duty Shifter Seat (White) It's common for the factory shift lever ball seat to wear, crumble and disintegrate over time. This often results in a sloppy or loose transmission shifter. The factory seat is soft so it can be squeezed into position...

Heavy Duty Shifter Seat (RED) It's common for the factory shift lever ball seat to wear, crumble and disintegrate over time. This often results in a sloppy or loose transmission shifter. The factory seat is soft so it can be squeezed into position...

Breather Hose (Front Of Valve Cover) OEM Toyota hose comes off the valve cover and goes to intake manifold. OEM Toyota Part #: 12262-35040 NOTE: Not for EFI applications. For EFI applications, see Part #: 1072415 (1984-1988), or Part #: 1072411...

OEM Water Pump Gasket Gaskets seal and mate surfaces between various components to keep oil, coolant, air, and fuel in their respective places. Over time gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs...

Denso Iridium IK24 Spark Plug These 3 step colder plugs are recommended by URD if you are running the 7th Injector and 2.1 pulley upgrade on a Supercharged 5VZ engine. If you are running the stock pulley (Low Boost) on the 5vz supercharger, Magnuson...

-6AN Fuel Rail Fitting (Fuel Inlet) LC Engineering offers this fitting that threads into your stock fuel rail inlet on your 22RE/22RET. It comes with an O-ring and a crush washer. NOTE: M14 x 1.50 to -6AN fitting. We also sell replacement Fuel Rails...

Seal Saver (Rear of Crankshaft) Do you have a pesky oil leak coming from the rear main seal? Don't just keep swapping out rear main seals. LC Engineering carries this seal saver that slides right over the rear hub of the crank and rides between the...

Seal Saver (Rear Main Seal) Do you have a pesky oil leak coming from the rear main seal? Don't just keep swapping out rear main seals. LC Engineering carries this seal saver that slides right over the rear hub of the crank and rides between the crank...

Oxygen Sensor Install Kit (2-Bolt Style) This kit contains everything you need to install the factory 2-bolt O2 sensor into your custom exhaust. It allows you to weld in the O2 sensor wherever you want it in the exhaust. Kit Includes: (2) Studs and...