Greasable Shackle Bolt (You Choose Size) LC Engineering carries all the parts you need to change or rebuild your own shackles. Bolts feature threaded zerk fittings that won't fall out when you're greasing them. Contact our Tech Support Line for...

Front 3-Link Lower Link Frame Bracket (You Choose Side) Individual Trail-Link Three™ Front 3-Link parts. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may...

Shackle Spacer For Extra Flex Springs (Front / Rear) LC Engineering carries all the parts you need to change or rebuild your own shackles. Bolts feature threaded zerk fittings that won't fall out when you're greasing them. Contact our Tech...

Spring Hangers (Sloped / Welded) Installing longer rear springs requires moving the rear spring hangers forward on the frame. The factory hangers are too thin to cut off and reuse. These hangers weld under the frame, forward of the stock units. Holes...

Upper Link Mount (OEM / Rock Assault) Trail-Gear customers tend to drive where the majority would never ventureâ€"climbing over rocks, hills, and rugged off-road terrain. Hobbies like that require occasional maintenance to the chassis and...

Front Leaf Spring Hanger (W/ Options) This hanger is used to as a front mount for our 47" front leaf springs. Hanger is included in IFS Eliminator and Classic Lift kits. Contact our Tech Support Line for further information at 928-575-2174...

GenV CompGate40 7psi External Wastegate (Choose Your Color) The GenV WG40 CompGate40 External Wastegate is a Motorsport proven, cost effective external wastegate â€" The Highest Flowing Wastegate of its kind. The GenV provides extensive user...

GenV CompGate40 7 PSI External Wastegate (Black) The GenV WG40 CompGate40 External Wastegate is a Motorsport proven, cost effective external wastegate â€" The Highest Flowing Wastegate of its kind. The GenV provides extensive user configuration,...

Inner Spring (GenV CompGate40) All GenV wastegates come with a range of springs (3-26psi). These are Inner Spring options available in these GenV CompGate40 Wastegates. Contact our Tech Support Line for further information at 928-575-2174...

22R/RE Re-Ring Kit (Gaskets / Bearings / Piston Rings) A re-ring kit is for anyone that needs to freshen-up their engine with a rebuild, but will not require pistons, water pump or an oil pump. All of the more wearable components such as rings,...

Sidedraft Carburetor Velocity Stacks (Air Horns / Shorty) Velocity Stacks or "Air Horns" allow smooth and even entry of air at high velocities into the intake tract, and replaces the ducting from the air-box (on EFI applications) providing a cleaner...

Air Intake Tube Clamp Need to connect the air intake duct and secure it properly? Simply get these clamps into place, and snug it down. Nothing makes a job easier than having proper fitting replacement parts. Look no further, LC has you covered. OEM...