4Runner

Rear Axle Wheel Stud These wheel studs are for rear axle application and has M12 X 1.50 threads. NOTE: Solid axle only. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further...

Timing Cover Gaskets (Conversion Cover) Our timing chain conversion kit takes a unique timing cover gasket. If you need to replace those gaskets due to leaks or removing the cover, we've got you covered. NOTE: These gaskets are designed for our Dual...

Shift Detent Bolt (Heavy Duty Transfer Case) The stock transfer case shift springs tend to give a sloppy feel to the shifters and can lead to the transfer case shift lever popping out of gear on the trail. We recommend heavy duty shift springs be used...

O-Ring (Oil Pump) The oil pump O-ring seals and mates the surfaces to keep oil in its respective place. Over time O-rings become brittle and break. Replace a leaky or corroded O-rings before severe damage occurs. Contact our Tech Support Line for...

OE Knuckle Stud Nut Factory Toyota knuckle hardware. Don't let knuckle stud failure ruin your day, get the best. NOTE: Sold Individually. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

NGK Spark Plug (BKR5EYA / 2087) LC Engineering carries NGK V-Power spark plugs, which offer economical performance for your Toyota, and are the only plugs with NGK's V-Groove technology. They enhance the spark kernel, lower the voltage requirement of...

NGK Spark Plug (BKR6EYA / 7990) LC Engineering carries NGK V-Power spark plugs, which offer economical performance for your Toyota, and are the only plugs with NGK's V-Groove technology. They enhance the spark kernel, lower the voltage requirement of...

8" Pinion & Transfer Case Flange Nut The flange nuts are recommended to be staked or peened over to lock so they are not considered reusable. This stock replacement nut is used on the 8" pinion in the rear 1979-2002 and most transfer case flanges...

Oil Drain Plug (Large) The LC Engineering 20R/22R Large oil drain plug is manufactured of high-quality material to handle the most challenging conditions. LC Engineering drain plugs and gaskets are the quality parts needed to do your job right. The...

Thermostat Housing Gasket (Round Rubber) Any time you replace the thermostat or remove the housing, you should replace the gasket to avoid future leaks. This gasket is a round rubber O-ring gasket that offers the best possible seal for your thermostat...

Clutch or Brake Pedal Cover Are your clutch and brake pedal covers worn out from years of driving your Toyota? Our stock replacement covers fit brake pedals on manual transmission vehicles or clutch pedals on 1979-1995 Toyota Pick-Ups, 4Runners &...

1/4" Blue High Pressure Hose (Fuel or Oil / Teflon Lined / Push-Lok Compatible) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 1/4" hose is perfect as an oil feed for your...