• OE Head Bolts If you ever remove your cylinder head, you should always replace the head bolts to prolong the service life of your engine. Cylinder head bolts go through a lot of stress, even in stock engines, and retorquing used bolts can sometimes...
    $37.95
  • OE Head Bolts LC Engineering always recommends replacing the old stretched head bolts with new ones to ensure the correct head torque. This OE head bolt set should be considered mandatory if you are replacing head gaskets on your 5VZ. If you are...
    $48.67
  • OE Head Bolts LC Engineering always recommends replacing the old stretched head bolts with new ones to ensure the correct head torque. This OE head bolt set should be considered mandatory if you are replacing head gaskets on your 3VZ. NOTE: Parts...
    $87.13
  • Pro Head Studs The ARP Cylinder Head Stud Set is a must for engines with increased cylinder pressure from high compression, nitrous oxide, turbocharged and supercharged applications. Made from 8740 Chromoly Steel, these studs test out at over 190,000...
    $160.09
  • PCV Grommet New PCV grommet for valve cover on 2RZ and 3RZ engines. Be sure to replace the grommet whenever you replace the PCV valve. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...
    $6.31
  • PCV Grommet New PCV grommet for valve cover on 20R, 22R, and 22RE engines. Be sure to replace the grommet whenever you replace the PCV valve. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...
    $3.19
  • OEM PCV Valve (Steel) A Factory replacement OEM PCV valve with steel design straight up outlet. Use this PCV to replace the stock one that has the molded rubber hose. Don't forget the new PCV grommet, see Part #: 1024084 or the new hose from Toyota...
    $8.70
  • PCV Valve (Plastic) This replacement plastic PCV valve is perfect for those that are running aftermarket carburetors such as the Weber 32/36 or 38. The 90 degree PCV makes for a better transition when plumbing your manifold on these applications...
    $6.29
  • Distributor Plug This plug is designed to plug the hole in the cylinder head after removing the distributor. NOTE: This is a part for the Pro Fuel Injection (SDS) setup we offer, not factory set-ups. Contact our Tech Support Line for further...
    $32.08
  • Black Valve Cover (9 Hole) This valve cover is the exact same as any 93-95 22re, but can also be used on any 20R 75-80 or any 22R/RE 81-95 when using the 85-95 valve cover gasket set. This hot valve cover has a gloss black Powder Coating and has the...
    $163.84
  • Red Valve Cover (9 Hole) This valve cover is the exact same as any 93-95 22re, but can also be used on any 20R 75-80 or any 22R/RE/RTE 81-95 when using the 85-95 valve cover gasket set. This hot valve cover has our signature bright Red Powder Coating...
    $163.84