Pro Stroker Crankshaft LC Engineering's stroker cranks are first sent through our inspection department to find any imperfections. After they pass the initial evaluation, they are Magnaflux inspected to verify the condition of the core. The crank is...

LC Engineering Street Crankshaft (+.010" Main / +.010" Rod) LC Engineering is proud to present our new Street Performer Crankshafts. We have spent years chasing core crankshafts to rework to our street performer crankshaft needs, But now we have taken...

Pulley Bolt (Front Balancer) OEM Toyota front crank hub bolt fits all 2RZ and 3RZ engines. We recommend replacing the balancer bolt any time you replace the front balancer. OEM Toyota Part #: 90105-16041 Contact our Tech Support Line for...

Seal Saver (Rear Main) Do you have a pesky oil leak coming from the rear main seal? Don't just keep swapping out rear main seals. LC Engineering carries this seal saver that slides right over the rear hub of the crank and rides between the crank and...

Main Bearing Set Coated (0.25mm / +.010") Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived...

Main Bearing Set Coated (Standard) Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived with...

Main Stud Set ARP main studs are manufactured from 8740 chrome-moly steel, heat-treated in-house, 200,000 psi tensile strength and precision J-form threads rolled after heat-treat to create a fastener that has threads 1000% stronger. All kits come...

OEM Main Bolt Set Time to replace those main bearing cap bolts while rebuilding your bottom end? No problem, we have you covered, order this complete set of 10 main cap bolts. Contact our Tech Support Line for further information at 928-575-2174...

Pro Main Stud Set ARP main bearing cap studs are manufactured from 8740 chrome-moly steel, heat-treated in-house, 200,000 psi tensile strength, and precision J-form threads rolled after heat-treat to create a fastener that has threads 1000% stronger...

Oil Drain Plug (Large) The LC Engineering 20R/22R Large oil drain plug is manufactured of high-quality material to handle the most challenging conditions. LC Engineering drain plugs and gaskets are the quality parts needed to do your job right. The...

Oil Drain Plug Gasket (Large) This is the oil drain plug gasket for LC Engineering's large oil drain plug Part #: 1013114. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...

Oil Drain Plug Gasket (Small) This is the oil drain plug gasket for LC Engineering's small oil drain plug Part # : 1013117. OEM Toyota Part #: 90430-12031 Contact our Tech Support Line for further information at 928-575-2174. Note:...