4Runner

Pro Spark Plug Wires Magnecor's KV85 competition (8.5mm) ignition cables feature Magnecor's exclusive 2.5mm high-capacity metallic inductance EMI-suppressed conductor consisting of stainless steel wire precisely wound at 200 turns per inch over a...

Manual Boost Controller (In Cabin) By far the easiest and most cost-effective way of controlling the amount of pressure going to the wastegate is via a Gated Boost Control Valve. All Turbosmart Gated Boost Controllers are manufactured from high-grade...

Pressure Damper (Fuel Rail) LC Engineering offers this replacement Fuel Pressure Damper that threads into the front of your fuel rail. Crush washers are supplied. Contact our Tech Support Line for further information at 928-575-2174...

OEM Fuel Gauge Level Sending Unit   OEM fuel gauge level sending unit found in most pickups and 4Runners.   OEM Toyota Part #: 83320-39456   NOTE: Please verify with your VIN prior to purchase as Toyota had numerous sending units within...

Oil Pan LC Engineering offers oil pans for most applications. The oil pan is a silicone seal pan so no gasket will be required. We recommend using Ultra Gray silicone when installing (not included). This pan will include a drain plug. This is an...

OEM Fuel Pressure Regulator (1995-2004 3RZ 4Runner/Tacoma/T100) OEM Fuel Pressure Regulator. OEM Toyota Part #: 23280-75020 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration...

Hi-Torque Starter If your engine starts hard or fails to start, the problem can be in the starter. And to replace your malfunctioning starter, there is no need to search long, just opt for this premium replacement. It was designed to strict OE...

Knuckle Stud Hardware Kit (Six Shooter Super Metal) Stronger and longer than stock Toyota replacement knuckle studs and more affordable than our Magnum Studs these studs will provide great strength without breaking the bank. Each stud is constructed...

2RZ/3RZ Distributor Need to replace your distributor? LCE has you covered with many OE components like this one to get you back on the road. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Power Steering Reservoir When installing a high flow pump such as the one listed above, it is important to use a larger reservoir to provide enough fluid when the system needs it. The stock reservoir is fine for the stock pump but is not adequate for...

Dana 60 to Toyota Driveline Flange This is the flange all you Dana 60 lovers have been waiting for. It is forged from 5140 high strength steel, CNC machined, and triple drilled to match all of the popular Toyota driveline bolt patterns. This flange...

Steering Pump Kit Hoses This kit contains one high pressure and three low pressure power steering lines. These lines are used to connect the pump, steering box and cooler together. The two hoses that go from the steering ram to the steering box are not...