4Runner

Test Pipe (17.5" x 2.25" Flange) Replace your restrictive catalytic converter with our high flow test pipe. This test pipe is made of stainless steel and comes with a high-temp ceramic coating to match our header and exhaust systems. This pipe will...

Test Pipe (17.5" x 2.50" Flange) Replace your restrictive catalytic converter with our high flow test pipe. This test pipe is made of stainless steel and comes with a high-temp ceramic coating to match our header and exhaust systems. This pipe will...

Carbureted Fuel Pump (3-5 Psi) This pump will maintain performance with carburetors for all street performance and off-road applications. This fuel pump will meet the performance demands of dual or single carburetor applications. This is an electric...

Boost Sensor (F.A.S.T. Ignition) This 2 Bar MAP (Manifold Absolute Pressure) sensor, is used as boost sensor for boost proportional retard with TRC-2, see Part #: 1082022. Contact our Tech Support Line for further information at 928-575-2174...

OEM Water Temperature Sensor EFi (4Runner/ Pickup/Celica/ Tundra) OEM Water Temperature Sensor EFi. OEM Toyota Part #: 89422-20010 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Gauge Pillar (Triple) Most older Toyota trucks had some pretty basic gauges (speedo, tach and fuel gauge). This doesn't work too well if you want to keep a close eye on the "heartbeat" of your engine. Most drivers want to see water temps, oil pressure,...

Sidedraft Carburetor Synchronizer This is the "must have" tool for proper tuning of Sidedraft Carburetors. Even the most experienced tuner needs this in his arsenal to make carburetor synchronizing precise and simple. Just place the synchronizer in...

Large Differential Armor In addition to our small style ring gear protector, we also have a larger size for those that prefer something a little bigger to protect their 3rd members. This differential armor welds into place. Kit Includes: (2)...

Haltech iC-7 Tube Mount (OD 1.25" / 31.75mm) Haltech’s new iC-7 Colour Display Dash is always better when it has the ability to mount with ease. That's where this plate comes in, it makes life EASY if you have a custom build (tube chassis). Grab...

OE Head Bolts LC Engineering always recommends replacing the old stretched head bolts with new ones to ensure the correct head torque. This OE head bolt set should be considered mandatory if you are replacing head gaskets on your 3VZ. NOTE: Parts...

Pro Chromoly Retainer Set (Dual Spring) For hot street motors or moderate race motors, the Chromoly retainers fit the bill nicely. Use these with our dual valve springs for proper valvetrain control up to 6,500 RPM. These retainers are substantially...

Clutch Master Cylinder The clutch master cylinder is located on the firewall inside the engine bay, usually next to the brake master cylinder. The clutch master cylinder is responsible for transferring the clutch pedal pressure hydraulically to the...