4Runner

HD Transfer Case Mount   As you have probably already discovered, off-roading places heavy abuse on your engine mounts and transfer case mounts. The soft stock mount tends to either flex far too much letting your shifters hit things in the cab, or...

OE Motor Mounts Over time, the rubber can start to deteriorate and fall apart due to the constant stress from the motor torque. Contamination from grease and oil can accelerate the deterioration process. These OE mounts are a direct replacement for...

Water Outlet Pipe (OEM Heater) Don’t get stuck with an overheated engine due to a failed Heater Outlet Pipe. The solid metal construction of this OEM Toyota pipe will keep you going for another 20+ years! This is for the exhaust side, for heater...

OEM Heater Tube (Under EFI Manifold) This is OEM toyota part and should be replaced if yours is corroded. OEM Toyota Part #: 87208-35170 NOTE: Should be used w/ our Part #: 1060012. Contact our Tech Support Line for further information at...

1-Bar Map Sensor (No Boost) Map sensors in 3 varieties (1 Bar, 2 Bar, and 3 Bar), and a barometric pressure sensor. 1 Bar Sensors are good for NA engines and measure from 0 (vacuum) to approximately atmospheric pressure. A 2 Bar Sensors is good for up...

Pro Fuel Map Sensor (SDS) Map sensors in 3 varieties (1 Bar, 2 Bar, and 3 Bar), and a barometric pressure sensor. 1 Bar Sensors are good for NA engines and measure from 0 (vacuum) to approximately atmospheric pressure. A 2 Bar Sensors is good for up to...

Pro Dual Valve Springs The Pro Dual Valve Springs are a "must-have" upgrade when running cam lift over .455" or when sustaining a constant 5,000rpm or higher. With 100lbs of seat pressure and open pressure of 210lbs (at .500" lift) they will work...

E92 E-Core Ignition Coil (F.A.S.T. Ignition) The FAST™ E92 E-Core Ignition Coil is the perfect solution for customers who currently run a FAST™ E6 CD Ignition or other modern ignition system. Designed to electrically match the FAST™ E6 CD Ignition,...

Main Bearing Set Coated (0.25mm / +.010") Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived...

Carburetor Rebuild Kit (Aisin / Stock) Don't get rid of your carb. Chances are it just needs to be rebuilt. This kit comes complete with everything you need to freshen up and rebuild your 22R Aisin 2-Barrel Carburetor for race, off-road or street use...

Steering Box Mount /Reinforcement (IFS Steering Box) If you're installing crossover steering on your 79-85 4wd Toyota you're going to need to mount an IFS steering box. Angled leading and trailing edges prevent frame cracking. Heavy duty design with a...

16" Flex Fan (Blue) Flex-a-lite high performance flex fans are designed to give you maximum airflow at low RPM, and the least amount of engine loading at high RPM. Less resistance at highway speeds equals more horsepower and better gas mileage. Flex...