4Runner

OE Oil Pressure Gauge Sender This Oil Pressure Gauge Sender is a stock OE replacement for 22RE and 3VZ engines. After years of use, electric components can go bad and give false readings to the ECU, that is why we recommend replacing them with new...

Matsuba Drive Shaft U-Joints (Stock Replacement) OEM Replacement U-Joint. We have tested these joints to 3700 ft-lbs of torque before failure. Includes four install clips and Zerk grease fitting. NOTE: Does not fit CV side of driveline. Contact...

Spring Hangers (Sloped / Welded) Installing longer rear springs requires moving the rear spring hangers forward on the frame. The factory hangers are too thin to cut off and reuse. These hangers weld under the frame, forward of the stock units. Holes...

Metal Backed Timing Chain Guides (Single Row) LC Engineering manufactures its metal-backed guides to address the common breakage problem of the plastic guides. These guides are a direct bolt-in upgrade and include mounting hardware. Contact our...

Street Tune-up Kit (w/ Plug Wires) A tune up kit that won't break the bank, for your 1980 to1992 20R/22R/RE from LC Engineering. Included are (4) NGK Spark Plugs BKR5EYA, a set of Denso Spark Plug Wires (Black), a Street Distributor Cap (black), and a...

OEM Head Gasket LC Engineering carries a complete line of Head Gaskets for all types of applications. This is an OEM Toyota head gasket for most 22 engines; it is a high-quality carbon composite and stainless gasket perfect for stock or mild...

Single Row Timing Chain These heavy-duty chains are the strongest on the market. They are OEM quality at a fraction of the price. Beware of imitations. This is a 96 link chain. Contact our Tech Support Line for further information at...

Foam Sock Filters These filter socks fit all sidedraft carburetor air horns. Kit Includes: (2) Filters (2) Zip ties Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...

Timing Belt Tensioner (Mechanical) This is a replacement timing belt tensioner for the 3.4L 5VZ V6. It is recommended to replace both the Belt Tensioner and timing belt together. Contact our Tech Support Line for further information at...

Carburetor Jet Kit (High Elevation) This kit is used to make the air/fuel mixture leaner. A properly jetted carburetor, that worked well a couple of years ago, may have lost some of its performance due to today's leaner fuels. Some symptoms of a lean...

Hastings Street Piston Ring Set (92.50mm / +.020″) LC Engineering's street rings are custom packaged by Hastings to our requirements. Hastings piston rings are built with steel, chrome-plated, barrel faced top compression rings. They have...

Hastings Street Piston Ring Set (93.50mm / +.060″) LC Engineering's street rings are custom packaged by Hastings to our requirements. Hastings piston rings are built with ductile iron, plasma moly top compression rings. They have conventional cast...