Front Leaf Spring Hanger This hanger is used to as a front mount for our 47" front leaf springs. Hanger is included in IFS Eliminator and Classic Lift kits. NOTE: Kit does not include bolts and bushings . This product should not be used in a...

Upper Link Frame Bracket (Front 3-Link) This is the Upper Link Frame Bracket that attaches to the passenger side of the frame. The link goes on the inside of the frame. This product should not be used in a manner that violates Federal EPA Laws...

Round Collector Exhaust Gasket Set This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. In the stock application, two will be required, this is a kit and will include (2) gaskets. Alternate exhaust...

Trail-Link Four Crossmember You will need this crossmember if you are looking to put your own kit together. It is designed to fit between a frame width of 36.69". This product should not be used in a manner that violates Federal EPA Laws. Contact...

+4" HD Front Leaf Spring (For V6 and V8 Applications) Our front 3", 4", and 5" springs are now available in a heavy-duty version with a 25% higher spring rate. The HD leaf springs are great for heavier trucks and 4Runners with full bodies and...

+3" HD Front Leaf Spring Our front 3", 4", and 5" springs are now available in a heavy-duty version with a 25% higher spring rate. The HD leaf springs are great for heavier trucks and 4Runners with full bodies and exo-cages, V6 Toyota and Tacoma...

38 1/4" Drag Link The Tacoma Drag Link is 38 1/4" long and works with our Rock Assault™ Left-Hand Drop Front Axle Housing with 59" WMS to WMS. This drag link is made from .250" wall DOM 1.25" tubing, precision tapped, and features a left side thread...

Power Steering Hose Conversion Kit When installing a SAS kit on your Tacoma, the rack and pinion has to be removed and replaced, usually with an 86-95 Toyota IFS power steering box. Trail-Gear has developed a Power Steering Hose Conversion kit that...

Power Steering Hose Conversion Kit When installing a SAS kit on your Tacoma, the rack and pinion has to be removed and replaced, usually with an 86-95 Toyota IFS power steering box. Trail-Gear has developed a Power Steering Hose Conversion kit that...

Firewall Kit When doing a solid axle conversion on a Tacoma, you are required to remove the OEM rack and pinion steering system, which leaves a large hole in your firewall. Our Tacoma firewall plate fills that hole and bolts into the OEM fastener...

Front Shackle Kit Hanging leaf springs from your Tacoma can be very difficult, especially when it comes to the shackles. The frame is thin and there are not many complete shackle kits available on the market, while the kits that are available are...

3-Link Rear Suspension Kit Trail-Gear is now offering a 3-Link suspension kit for the rear of your 1995.5-2004 Tacoma. Every Tacoma component in this kit has been engineered for maximum durability and tested using the most advanced engineering...