Model

Power Steering Pump Bracket Kit (Rock Assault) This pump bracket is designed to adapt our "TC" style power steering pumps to your 75-95 Toyota 20R/22R/RE/RET engine. This bracket will utilize the stock idler pulley for the power steering belt. NOTE:...

HD Transfer Case Mount   As you have probably already discovered, off-roading places heavy abuse on your engine mounts and transfer case mounts. The soft stock mount tends to either flex far too much letting your shifters hit things in the cab, or...

OE Motor Mounts Over time, the rubber can start to deteriorate and fall apart due to the constant stress from the motor torque. Contamination from grease and oil can accelerate the deterioration process. These OE mounts are a direct replacement for...

Water Outlet Pipe (OEM Heater) Don’t get stuck with an overheated engine due to a failed Heater Outlet Pipe. The solid metal construction of this OEM Toyota pipe will keep you going for another 20+ years! This is for the exhaust side, for heater...

ULTIMATE Lift Hood Strut Kit (01-04 Tacoma) Our new ULTIMATE Lift High Lift Hood Strut Kit for late 1st Gen (’01-’04) Tacomas eliminates the prop rod and makes your engine compartment free and clear of obstacles. One-handed hood opening...

ULTIMATE Lift Hood Strut Kit (93-98 T100) Our new ULTIMATE Lift Hood Strut Kit for the ’93-98 T100 eliminates the prop rod and makes your engine compartment free and clear of obstacles. One-handed hood opening and closing â€" the struts lift...

OEM Heater Tube (Under EFI Manifold) This is OEM toyota part and should be replaced if yours is corroded. OEM Toyota Part #: 87208-35170 NOTE: Should be used w/ our Part #: 1060012. Contact our Tech Support Line for further information at...

1-Bar Map Sensor (No Boost) Map sensors in 3 varieties (1 Bar, 2 Bar, and 3 Bar), and a barometric pressure sensor. 1 Bar Sensors are good for NA engines and measure from 0 (vacuum) to approximately atmospheric pressure. A 2 Bar Sensors is good for up...

Pro Fuel Map Sensor (SDS) Map sensors in 3 varieties (1 Bar, 2 Bar, and 3 Bar), and a barometric pressure sensor. 1 Bar Sensors are good for NA engines and measure from 0 (vacuum) to approximately atmospheric pressure. A 2 Bar Sensors is good for up to...

Pro Dual Valve Springs The Pro Dual Valve Springs are a "must-have" upgrade when running cam lift over .455" or when sustaining a constant 5,000rpm or higher. With 100lbs of seat pressure and open pressure of 210lbs (at .500" lift) they will work...

E92 E-Core Ignition Coil (F.A.S.T. Ignition) The FAST™ E92 E-Core Ignition Coil is the perfect solution for customers who currently run a FAST™ E6 CD Ignition or other modern ignition system. Designed to electrically match the FAST™ E6 CD Ignition,...

DJM Steel Lowering Block Kit (4" Rear) All steel block kits for those who have souped up your rides! Of Course they have new U-bolts, nuts and washers! Contact our Tech Support Line for further information at 928-575-2174. Note: Images...