Adapter Kit (Aisin 22R Carb to K&N Filter) LC Engineering manufactures custom adapters to match your Aisin 22R carburetor to a K&N or similar flanged air filter. NOTE: Fits any filter with a 5-1/8" mount pattern. Contact our Tech...

Viton Valve Seals Viton Valve Seals are the latest in valve seal material, surpassing Teflon! Heat resistant to 440 degrees, they eliminate oil consumption through the valve guide and provide smoother engine idling by stopping manifold air and oil...

Front or Rear Leaf Spring Bushings For high-performance applications, the combination of heavy-duty or performance leaf springs and performance polyurethane spring bushings deliver the maximum benefit. For lighter-duty leaf springs, they add a higher...

Thrust Bearing Set Coated (Standard) Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived with...

OE Intake Manifold Gasket Set This is a OE replacement 3VZ intake manifold gasket set. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the...

U Bend (6″ Radius) Use these 3" U-Bends for building your own headers or replacing a bent or damaged tube. NOTE: Size listed is the outside diameter. Constructed of mild steel. Contact our Tech Support Line for further information at...

Toyota Backing Plate Eliminator (w/ Brake Line Holder) Toyota solid axle backing plates (sometimes called dust shields) seem to become damaged with even the slightest touch, but removing them leaves your brake hard lines unsecured. On the other hand,...

Air Filter Adapter (Weber 32/36/38 to 20R) LC Engineering manufactures custom adapters to match your Weber carburetor to the stock 20R air filter. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Throttle Cable (36" Stainless Steel w/ Ends) 36" Stainless Steel, super smooth, universal automotive throttle cable with ends. This cable is designed for long life and is made from the finest materials. The Stainless Steel braided outer housing can be...

Air Temp Sensor (â"¦Å“″ NPT) Air Intake Temperature sensor for use with our Pro Fuel Injection systems. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may...

Oil Pump Cover OEM oil pump cover for 2RZ. Recommended to replace the cover anytime you replace the oil pump rotor setup. OEM Toyota Part #: 15115-75051 NOTE: For 2RZ/3RZ Oil Pump Cover Allen Head Hardware Upgrade Kit see Part #: 1016080...

Pro Fuel Injection Plate Kit Custom plates and adapters needed to install our Pro Fuel Injection kits on a 22R/RE engine. Plate Kit #1 Includes: Water block off plate Air temp sensor plate EGR block plates MAP sensor mount plate All hardware...