Model

Rock Assault Steering Stops A good set of steering stops is critical so that your steering does not over travel and damage other steering or axle components. Our Rock Assault steering stops are machined from solid billet so you will never have to worry...

Matsuba Drive Shaft U-Joints (Stock Replacement) OEM Replacement U-Joint. We have tested these joints to 3700 ft-lbs of torque before failure. Includes four install clips and Zerk grease fitting. NOTE: Does not fit CV side of driveline. Contact...

26" Extended Brake Line (Front / Female - Female) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size:...

26" Extended Brake Line (Rear / Female - Male) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size...

NGK 5mm Spark Plug Wires (w/ Post Style Aftermarket Coil) We realize not every engine is a race engine. Don't overspend on features that you can't use. The NGK spark plug wires are perfect for the street were high RPM's are not sustained and upgraded...

GT25 / GT28 Discharge Flange (5-Bolt Deep) New part, text coming soon. Call the sales desk for more information. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Valve Keepers (Hardened) For high lift cams, it is recommended to use hardened valve keepers. LC Engineering carries hardened valve keepers for all 20R/22R/22RE valves using stock Toyota retainers as well as our Pro Series Titanium retainers. A must...

Mini Install Kit This mini install kit covers your basic installation requirements. Kit Includes: Crush Collar Rear Pinion Seal Pumpkin Gasket Shim Kit Contact our Tech Support Line for further information at 928-575-2174. Note:...

Oil Feed Line (Stainless Steel Braided) Looking for a better oil feed line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any application...

Cam Follower (35mm / Shim Under Bucket) These 35mm cam buckets are designed for use with larger profile cams in your 2RZ or 3RZ engine. The larger outside diameter allows the cam profile to be much larger without the cam lobe rolling off the edge of...

Cam Follower (Shim Under Bucket) These 34mm Cam Followers are designed for use with larger profile cams in your 2RZ or 3RZ engine. The larger outside diameter allows the cam profile to be much larger without the cam lobe rolling off the edge of the...

Cam Follower (Shim Under Bucket) These 31mm Cam Followers are designed for use with larger profile cams in your 2RZ, 3RZ or 5VZ engine. The larger outside diameter allows the cam profile to be much larger without the cam lobe rolling off the edge of...