Model

Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...

Rear Seal Gasket Assembly High-quality silicone seals with a double lip for improved sealing. Includes OEM rear main seal & housing gasket. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Water Block Plate Kit (Cylinder Head-Rear) This block plate is used primarily on our billet race motors to block off the water passage on the back of the cylinder head. Contact our Tech Support Line for further information at 928-575-2174...

Oil Fitting (28BSPT to 1/8"NPT Female) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This is a steel fitting that will come in a silver or gold zinc finish. the 1/8 fittings may seem...

Rear Track Arm Bushing These Energy Suspension performance polyurethane torque arm bushings reduce wheel hop on acceleration, shudder during braking, and adds greater handling control. These are a must when using larger tires and horsepower upgrades...

OEM Exhaust Hardware Kit This kit will contain (2) Bolts and (2) Springs needed for installing your exhaust back on at the collector. Kit Includes: (2) 90080-10291 Bolts (2) 90080-50392 Springs Contact our Tech Support Line for further...

Street Performer Retainer Set (Single Spring) Our Street Performer retainers are an excellent OEM replacement that matches our street performer valve springs perfectly. If you have a mild street motor that doesn't need anything exotic in the...

Oil Pump Drive Spline (Single Row) If you're replacing the single timing chain on your early Toyota motor (83-84) with the more desirable dual-row chain, you will need a dual row drive spline to make it all work right. OEM Toyota Part #:...

Weber Gasket Kit If you just need to freshen up the gaskets on your Weber carburetor, this kit if for you. It does not include any accelerator pump diaphragms or other parts included in a complete rebuild- only the gaskets. Contact our Tech...

Oil Dipstick Only This is a replacement dipstick for the 1996-2004 2RZ & 3RZ engines in the Tacoma's and 4Runners. OEM Toyota Part #: 15301-75060 Contact our Tech Support Line for further information at 928-575-2174. Note: Images...

Intake Valve (Black Nitride w/ Anti Friction Coating / 37.5mm 1mm Over) These valves are 1MM larger than stock, great for ported heads that need more flow through the valves. These stainless steel valves are lighter than the stock steel valves and...

Exhaust Valve (Black Nitride w/ Anti Friction Coating / 30.5mm - 1mm Over) These valves are 1MM larger than stock, great for ported heads that need more flow through the valves. These Black Nitride valves are lighter than the stock steel valves and...